Specifications:

  • Premium Posi Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacements

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Part Details

  • Front or Rear Location: Front
  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Jacking up the Car (0:23)
    • Park on level ground
    • Set the parking brake firmly
    • Use a 19mm socket and a breaker bar to break the lug nuts loose
    • Jack up the car and place jack stands under the car
    • Remove the lug nuts the rest of the way
    • Remove the wheel
  2. step : Removing Caliper and Pads, Rotors (3:12)
    • Turn the wheel to make more room
    • Try to compress the piston as much as possible
    • Use 14mm wrench to loosen upper and lower caliper bolts
    • Remove the bolts
    • Slide the caliper off the bracket
    • Tie the caliper with a bungee cord so it doesn't hang
    • Remove the brake pads
  3. step : Removing the Rotor and Caliper Bracket (5:17)
    • Use 17 mm socket and a breaker bar to brake the caliper bracket bolts loose
    • Use a ratchet to remove them the rest of the way
    • Take the bracket off
    • Remove the rotor (use hammer if necessary)
  4. step : Cleaning Brake Hardware (7:22)
    • Use brake parts cleaner and a wire brush to scrub the hardware and the bracket
    • Check the slide pins and lubricate them if necessary
    • Use caliper grease or silicone paste to lubricate the slide pins
  5. step : Reinstalling the Rotor and Caliper Bracket (12:02)
    • Install the rotor backwards and clean it with brake parts cleaner
    • Flip it the correct way and clean the other side
    • Thread on a lug nut to help hold the rotor
    • Install the caliper bracket
    • Install the two 17mm bolts by hand
    • Torque them down to 89 ft-lbs
  6. step : Installing the Pads and Caliper (13:54)
    • Grease up the ears of the pads as well as the backing plate
    • Install the pad with the wear indicator on the inside
    • Install the outer pad
    • Use an old brake pad and a large C clamp to compress the caliper pistons
    • Install the caliper
    • Tighten the 14mm bolts by had
    • Torque them down to 20 ft-lbs
    • Step on the brake pedal a few times until pedal is stiff
  7. step : Reinstalling the Wheel and Lowering the Vehicle (17:37)
    • Remove the lug nut
    • Install the wheel
    • Start the lug nuts by hand
    • Tighten them down as much as possible with the socket
    • Jack up the car
    • Remove jack stands
    • Carefully lower the car to the ground
    • Torque the wheels to 89 ft-lbs in a cross pattern

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Bungee Cord

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005-2006Saab 9-2X Saab 9-2X Front Premium Posi Ceramic Brake Pads Nakamoto
2003-2006Subaru Baja Subaru Baja Front Premium Posi Ceramic Brake Pads Nakamoto
2003-2010Subaru Forester Subaru Forester Front Premium Posi Ceramic Brake Pads Nakamoto
2002Subaru Impreza Subaru Impreza RS Front Premium Posi Ceramic Brake Pads H4 2.5L Nakamoto
2003-2011Subaru Impreza Subaru Impreza Front Premium Posi Ceramic Brake Pads Nakamoto
2003-2011Subaru Impreza Outback Subaru Impreza Outback Front Premium Posi Ceramic Brake Pads Nakamoto
2004-2005Subaru Impreza WRX Subaru Impreza WRX Front Premium Posi Ceramic Brake Pads Nakamoto
2008-2011Subaru Impreza WRX Subaru Impreza WRX Front Premium Posi Ceramic Brake Pads Nakamoto
2002Subaru Legacy Subaru Legacy GT Front Premium Posi Ceramic Brake Pads Nakamoto
2003-2004Subaru Legacy Subaru Legacy Front Premium Posi Ceramic Brake Pads Nakamoto
2005Subaru Legacy Subaru Legacy Front Premium Posi Ceramic Brake Pads (excluding Turbo Models) Nakamoto
2006-2013Subaru Legacy Subaru Legacy Front Premium Posi Ceramic Brake Pads (excluding GT Models) (excluding Turbo Models) Nakamoto
2002-2013Subaru Outback Subaru Outback Front Premium Posi Ceramic Brake Pads Nakamoto

This part replaces:

  • Nakamoto CD929
Part #: 1ABPS00341


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD929

How-to Video:

(19:54 min)