Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Ceramic
  • Front or Rear Location:   Front
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

This front brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • 4 Piece FRONT Brake Pad Set
  • Direct replacement
  • Professional Grade Ceramic Enhanced Disc Brake Pads

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove front wheel. (1:06)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your lug wrench to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your lug wrench.
    • Remove the wheel and set aside.
  2. step : Remove the front brake calipers (1:30)
    • Use a screwdriver to force the pistons back in.
    • Remove the three 3/8 Allen bolts to remove the calipers.
    • Clean out the Allen bolts if needed.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Install new brake rotor and pads (3:45)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the front brake caliper.
    • Compress the front brake caliper piston with a c-clamp to reset the pistons.
    • Mount the front brake caliper and torque the 3/8 Allen bolts in as tight as they will go by hand.
  4. step : Put your front wheel back on (8:14)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 75 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brake pads and rotors (6:30)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Excellent
Exact fit for my 1999 Taurus wagon. Quality parts.
March 15, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1994-2000Ford Taurus Ford Taurus Front Premium Posi Ceramic Brake Pads Nakamoto
1995-1998Ford Windstar Ford Windstar Front Premium Posi Ceramic Brake Pads Nakamoto
1993-1994Lincoln Continental Lincoln Continental Front Premium Posi Ceramic Brake Pads Nakamoto
1994-2000Mercury Sable Mercury Sable Front Premium Posi Ceramic Brake Pads Nakamoto
Part #: 1ABPS00640


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD601

How-to Video:

(09:09 min)