Specifications:

  • 4 Piece FRONT Brake Pad Set
  • Includes shims
  • Direct replacements
  • Premium Posi Ceramic Disc Brake Pads

 

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Part Details

  • Front or Rear Location: Front
  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Remove hub cap
    • While your car is still on the ground, use your 21mm socket to loosen your lug nuts
    • Jack up and secure your car with jack stands
    • Remove the lug nuts with your 21mm socket and ratchet
    • Remove the wheel and set aside
  2. step : Removing the Calipers (1:30)
    • Remove the 14mm bolts to remove the calipers
    • Use a wire tie to fasten the caliper out of the way
    • Use your screwdriver to pry out your brake pads
    • Use your 17mm socket and ratchet to remove your caliper brackets to access the rotors
    • Pull off the brake rotor
  3. step : Installing the New Rotor and Pads (3:57)
    • Clean new rotor with brake cleaner
    • Check your caliper pins to make sure they are in good working order
    • Put your caliper bracket back on, and tighten the 17mm bolts to 80 ft lbs
    • Insert your new pads into the brackets
    • Use your C-clamp or caliper tool to compress your caliper
    • Place your caliper onto the bracket
    • Tighten your 14mm bolts to 25 ft lbs
  4. step : Reinstalling the Wheel (8:10)
    • Make sure to use a star pattern when putting your wheel lugs back on
    • Tighten to 100 ft lbs
    • Replace hubcap
  5. step : Test and Set Brakes (7:46)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place
    • Test the brakes in your driveway before taking the car onto the road
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph
    • Obviously this is best done on a straight back road without any traffic

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
The brake pads were surprisingly good.
After putting the brake pads to my car, I thought how much I could save if I had done it by myself for years. Putting them was easy and they fit in my 1999 Toyota Camry perfectly. I will try it for 2009 Toyota Highlander. Thanks.
September 21, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1997 Geo Prizm Front Premium Posi Ceramic Brake Pads Nakamoto
  • 1992-1999 Toyota Camry Front Premium Posi Ceramic Brake Pads L4 2.2L Nakamoto
  • 2000-2001 Toyota Camry 14 Inch Wheels Front Premium Posi Ceramic Brake Pads L4 2.2L Nakamoto
  • 1994-1997 Toyota Celica Front Premium Posi Ceramic Brake Pads L4 1.8L Nakamoto
  • 1993-1997 Toyota Corolla Front Premium Posi Ceramic Brake Pads Nakamoto
  • 1996-2000 Toyota Rav4 Front Premium Posi Ceramic Brake Pads Nakamoto

This part replaces:

  • Nakamoto CD562
Part #: 1ABPS00288

Nakamoto
Brand #: CD562

How-to Video:

(09:00 min)