Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Brake Pad Friction Material: Ceramic
  • Front or Rear Location: Front

Specifications:

  • Premium Posi Ceramic Enhanced Disc Brake Pads
    • Standard equipment came with ceramic pads
  • 4 Piece FRONT Brake Pad Set
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the Wheel (1:56)
    • Remove the lug nut caps and center cap.
    • Loosen the lug nuts on the wheel.
    • Lift the vehicle using jack stands.
    • Remove the lug nuts and pull the wheel off.
    • Turn the wheel so you can access the brakes easily.
  2. step : Removing the Brakes (2:16)
    • Remove the two 19mm bolts on the back of the caliper.
    • Lift the caliper up and set it aside.
    • Remove the brake pads.
    • Make sure the slide pins on the back of the bracket slide in and out easily. If not remove them and grease them.
    • Remove the two 18mm bolts on the back of the bracket. Use the breaker bar for extra leverage.
    • Thread the lug nuts on by a few threads.
    • Hit the disk to loosen it. Hit from the front then on the back, turning the rotor and hitting it again.
    • Remove the lug nuts and rotor.
  3. step : Installing New Brakes (6:32)
    • Slide the rotor into place.
    • Clean the bracket with a wire brush.
    • Put the bracket back into place and start the bolts.
    • Replace the nuts on the rotor.
    • Tighten the bracket bolts to 90-95ft/lbs.
    • Clean the old slides (if the pads did not come with new slides) with a wire brush then put them back into place.
    • Replace the brake pads. The larger one goes on the back.
    • Put the old inner pad into the caliper and use a C-Clamp to reset the caliper. Tighten the C-clamp to push the pistons back into the caliper.
    • Put the caliper down over the brake pads.
    • Replace the 19mm bolts that hold the caliper to the slides. Tighten to 55-60ft/lbs.
  4. step : Replacing the Wheel (9:53)
    • Straighten the wheel.
    • Replace the wheel and tire.
    • Thread the lug nuts.
    • Lower the vehicle.
    • Tighten the lug nuts in a crossing pattern.
    • Replace the caps and trim.
  5. step : Prep the Brakes (10:39)
    • Pump the brakes a few times until the pedal is firm.

Tools needed for replacement:

    General Tools

  • Chisel
  • Jack Stands
  • Large C-Clamp
  • Sledge Hammer
  • Wire Brush

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket
  • 22mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Perfect as usual
I can't say enough good things about this company. Been ordering from them for 3 years now. Easy to navigate website. Low prices. Smooth transaction processing. Free shipping. What more could you want?
January 16, 2018
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2007Cadillac Escalade Cadillac Escalade Front Premium Posi Ceramic Brake Pads Nakamoto
2007Cadillac Escalade ESV Cadillac Escalade ESV Front Premium Posi Ceramic Brake Pads Nakamoto
2007Cadillac Escalade EXT Cadillac Escalade EXT Front Premium Posi Ceramic Brake Pads Nakamoto
2007Chevy Avalanche 1500 Chevy Avalanche 1500 Front Premium Posi Ceramic Brake Pads Nakamoto
2005-2006Chevy Silverado 1500 Chevy Silverado 1500 Front Premium Posi Ceramic Brake Pads for Models with Rear Drum Brakes Nakamoto
2007Chevy Silverado 1500 Classic Chevy Silverado 1500 Classic Front Premium Posi Ceramic Brake Pads for Models with Rear Drum Brakes Nakamoto
2007Chevy Suburban 1500 Chevy Suburban 1500 Front Premium Posi Ceramic Brake Pads Nakamoto
2007Chevy Tahoe Chevy Tahoe Front Premium Posi Ceramic Brake Pads Nakamoto
2005-2006GMC Sierra 1500 GMC Sierra 1500 Front Premium Posi Ceramic Brake Pads for Models with Rear Drum Brakes Nakamoto
2007GMC Sierra 1500 Classic GMC Sierra 1500 Classic Front Premium Posi Ceramic Brake Pads for Models with Rear Drum Brakes Nakamoto
2007GMC Yukon GMC Yukon Front Premium Posi Ceramic Brake Pads Nakamoto
2007GMC Yukon XL 1500 GMC Yukon XL 1500 Front Premium Posi Ceramic Brake Pads Nakamoto

This part replaces:

  • Nakamoto CD1092
Part #: 1ABPS00083


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD1092

How-to Video:

(11:06 min)