This front brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • Premium Posi Ceramic Disc Brake Pads
  • 4 Piece FRONT Brake Pad Set
  • Includes shims
  • Direct replacement

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:10)
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Inspect and remove the brakes (1:46)
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 14 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and remove the caliper.
    • Unbolt the 15 mm caliper bracket bolts.
    • Remove the rotor
  3. step : Install the new disc brakes (4:33)
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle.
    • Mount the caliper bracket and torque the 15 mm bolts to 85-90 ft lbs
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 14 mm socket.
    • Torque the 14 mm bolt to 35 ft lbs.
  4. step : Mount the wheel (8:17)
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Great Value
These brake pads look like they are very high quality. They fit easily and matched up with the rotors quickly and with no squeaking or squealing.Great value for the money!
April 1, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2007 Chevy Cobalt Front Premium Posi Ceramic Brake Pads for Models with 4 Wheel Disc Brakes Nakamoto
  • 2008-2009 Chevy HHR SS Front Premium Posi Ceramic Brake Pads for Models with 4 Wheel Disc Brakes with Single Piston Calipers Nakamoto
  • 2010 Chevy HHR Front Premium Posi Ceramic Brake Pads for Models with 4 Wheel Disc Brakes with Single Piston Calipers Nakamoto
  • 2004-2006 Chevy Malibu Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2004-2006 Chevy Malibu Maxx Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2007 Pontiac G5 Front Premium Posi Ceramic Brake Pads for Models with 5 Lug Wheels 4 Wheel Disc Brakes Nakamoto
  • 2005-2008 Pontiac G6 Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2006-2009 Pontiac Solstice Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2005-2007 Saturn Ion Red Line Front Premium Posi Ceramic Brake Pads Nakamoto
  • 2007-2010 Saturn Sky Front Premium Posi Ceramic Brake Pads Nakamoto

This part replaces:

  • Nakamoto CD1028
Part #: 1ABPS00159

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD1028

How-to Video:

(09:17 min)