Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Front Brake Rotor Specifications:
    Vented
    12.99" (330mm)
    6 Lug
  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Rotor Coating: Zinc Coated
  • Kit Includes:
    (1) Front Ceramic Brake Pad Set
    (1) Rear Ceramic Brake Pad Set
    (2) Front Performance Brake Rotors
    (2) Rear Performance Brake Rotors
  • Rear Brake Rotor Specifications:
    13.58" (345mm)
    6 Lug
    Vented
  • Product Line: Performance
  • Brake Pad Features & Benefits:
    OE Grade Multi-Layer Shim
    Positive Mold Technology
    Environmentally Compliant
    Thermal Scorched

Brake Rotor Specifications:

  • Fits 6 Stud Wheels
  • 12.99" (330mm) Front vented rotor
  • 13.58" (345mm) Rear vented rotor

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:07)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:25)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:47)
    • Remove the two 19mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • If only changing the pads, continue to Step 6 and install the new pads
  4. step : Removing the Brake Rotor (2:44)
    • Remove bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, douse the back side with penetrating oil and use two M10 bolts to press the rotor off
  5. step : Installing the New Brake Rotor (4:08)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Clean the caliper bracket with a wire brush
    • Remove the brake pad slides
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on with a flat blade screwdriver
    • Put the bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
  6. step : Installing the New Brake Pads (5:32)
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Grease the brake pads
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 50 foot-pounds of torque
  7. step : Reattaching the Wheel (7:29)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (7:53)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Floor Jack
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Fluid
  • Mineral Spirits
  • Brake Parts Cleaner
  • Rust Penetrant
  • White Grease
  • M10 x 7cm bolts

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)

  • Sockets - Metric

  • 22mm Socket
  • 19mm Socket
  • 18mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Awesome price and service...
The brake kits were as described and work great. And the price couldn't be beat.
August 4, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2015-2016Cadillac Escalade Cadillac Escalade Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
2017-2018Cadillac Escalade Cadillac Escalade without Brembo Brake Package Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
2015-2016Cadillac Escalade ESV Cadillac Escalade ESV Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
2017-2018Cadillac Escalade ESV Cadillac Escalade ESV without Brembo Brake Package Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
2014-2018Chevy Silverado 1500 Chevy Silverado 1500 Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
2015-2018Chevy Tahoe Chevy Tahoe (excluding Police Package) Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
2014-2018GMC Sierra 1500 GMC Sierra 1500 Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
2015-2016GMC Yukon GMC Yukon Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
2017-2018GMC Yukon GMC Yukon without Brembo Brake Package Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
2015-2016GMC Yukon XL GMC Yukon XL Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
2017-2018GMC Yukon XL GMC Yukon XL without Brembo Brake Package Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit

This part replaces:

  • Reference Number CD1367
  • Reference Number CD1707
  • Reference Number 55133
  • Reference Number 55097
Part #: 1APBS01098


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:17 min)