Brake Pad Specifications:

  • Professional Grade Ceramic Disc Brake Pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Cross Drilled, Slotted, And Zinc Coated
  • Direct replacements
  • Fits 5 lug wheel
  • 10.47" (265mm) diameter

Brake Caliper Specifications:

  • Brand New Brake Caliper
  • Comes as a Pair
  • Includes LH (Driver Side) & RH (Passenger Side) Front
  • OE-matched design and specifications
  • Engineered to meet or exceed OE performance and durability
  • All new casting and parts NO CORE required

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Note:
The rotors do not include wheel bearings or seals.

Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Coating: Zinc Coated
  • Brake Pad Bonding Type: Premium Posi
  • Brake Rotor Type: Cross Drilled & Slotted
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Kit Includes: (2) Front Brake Calipers
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 10.51" (267mm)
  • Front Brake Rotor Specifications: 5 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:25)
    • Remove the lug nut covers and center cap.
    • Loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
    • Placing the wheel under a lift point on the vehicle will add extra security in the event of a floor jack failure.
  2. step : Remove the calipers (1:57)
    • Observe your brakes; look for excessive wear or gouges in the rotor and check the thickness of the brake pads.
    • Use a flat blade screwdriver to pry in between the caliper to compress the piston to help get the caliper off.
    • Take a 3/8 Allen wrench and place it in the caliper bolt.
    • Use an open wrench to loosen up the bolt (which you are holding in place with the Allen wrench to get it loose)
    • Remove the caliper and discard the pads.
  3. step : Remove the rotor (4:59)
    • Use a hammer and chisel to remove the dust cap.
    • Take your pliers and remove the cotter pin.
    • With a 27 mm socket and ratchet, remove the nut on the center of the rotor.
    • Remove the washer and pull the rotor off.
  4. step : install the new rotor (6:25)
    • Clean the rotor with brake clean.
    • Coat the inside of the hub with bearing grease.
    • Insert the race with the race installation tool.
    • Apply bearing grease to the bearings.
    • Insert the inner bearings to the inside of the hub and then install the seal with your race installation tools.
    • Flip the rotor and repeat the process.
    • Continue to Part 2.

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Adjustable Wrench
  • Lug Wrench

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket
  • 27mm socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1991Chevy Blazer S10 Chevy Blazer S10 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit for Models with ABS Brakes Performance
1992-1997Chevy Blazer S10 Chevy Blazer S10 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance
1994-1995Chevy S10 Pickup Chevy S10 Pickup 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit for Models with ABS Brakes Performance
1996-2003Chevy S10 Pickup Chevy S10 Pickup 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance
1991GMC Jimmy S-15 GMC Jimmy S-15 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit for Models with ABS Brakes Performance
1992-1997GMC Jimmy S-15 GMC Jimmy S-15 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance
1994-1995GMC S-15 Sonoma GMC S-15 Sonoma 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit for Models with ABS Brakes Performance
1996-2003GMC S-15 Sonoma GMC S-15 Sonoma 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance
1996-1997Isuzu Hombre Isuzu Hombre Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance
1998-2000Isuzu Hombre Isuzu Hombre 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance

This part replaces:

  • Reference Number 18-4072
  • Reference Number 18-4071
  • Hollander 536-01442L
  • Hollander 536-01441R
Only 2 left in stock
Part #: 1APBS00968


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:26 min)