Brake Drum Specifications:

  • Fits 4 stud wheels
  • 10.67" Outside diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:05)
    • Remove the lug nut covers
    • Remove the hub cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:25)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brake Pads (2:00)
    • Use a flat blade screwdriver or pry bar to push the pistons in
    • Remove two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (3:10)
    • Remove two 15mm bolts from the brake caliper bracket using a ratchet and pipe for leverage
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (3:55)
    • Slide the rotor on
    • Put the bracket back into place
    • Start the 15mm bolts by hand
    • Tighten the bolts to 80 foot-pounds of torque
  6. step : Installing the New Brake Pads (4:37)
    • Remove the brake pad slides from the bracket
    • Clean the slides with a wire brush
    • Push the brake pad slides on
    • Attach the wear indicator to the top of the inside brake pad
    • Install the new brake pads into the bracket with the wear indicator on the upper side
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Clean the piston slides and apply bearing grease
    • Insert the piston slides
    • Thread bolts by hand
    • Tighten bolts to 20 foot--pounds
  7. step : Reattaching the Wheel (8:06)
    • Straighten out the wheel
    • Slide the wheel into place
    • Apply penetrating oil to the wheel studs
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the wheel cover
    • Reattach the lug nut covers
  8. step : Testing the Brakes (8:39)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:05 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket



This part replaces:

  • Reference Number MD956
  • Reference Number S795
  • Hollander 530-02125
  • Reference Number 80109
  • Reference Number 55083

Vehicle Fit

  • 2005-2006 Chevy Cobalt excluding SS Models Front & Rear Premium Posi Semi-Metallic Brake Kit
  • 2007-2008 Chevy Cobalt LT Front & Rear Premium Posi Semi-Metallic Brake Kit for Models with 15 Inch Wheels
  • 2007-2008 Chevy Cobalt LS Front & Rear Premium Posi Semi-Metallic Brake Kit
  • 2007-2008 Pontiac G5 Front & Rear Premium Posi Semi-Metallic Brake Kit
  • 2003-2007 Saturn Ion Front & Rear Premium Posi Semi-Metallic Brake Kit
Part #: 1ABFS03088

Out of Stock

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More