Brake Rotor Specifications:

  • Fits 5 Lug Wheel
  • 12.28" (312mm) diameter vented front
  • 12.26" (286mm) diameter solid rear

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:48)
    • Loosen the lug nut covers with a pick
    • Loosen one of the lug bolts with a key found by the spare tire
    • Loosen the 17mm lug bolts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:23)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:53)
    • Pry off the caps on the brake caliper
    • Remove the T47 bolts from the brake caliper
    • Pry off the wire clip with a flat blade screwdriver
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (2:47)
    • Remove the 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 screw from the rotor
    • Spray rust penetrant around the edge of the hub
    • Strike the hub area of the rotor with the ball end of a ball peen hammer
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (3:48)
    • Slide the rotor on
    • Tighten the T30 screw to the rotor
    • Clean the brake caliper bracket with a wire brush
    • Put the bracket back into place
    • Start the 21mm bolts by hand
    • Tighten the bolts to 90 foot-pounds of torque
  6. step : Installing the New Brake Pads (4:51)
    • Use a large C-clamp and the old pad to push the piston back
    • Apply brake grease to the back of the pad and their contact points in the bracket
    • Install the new brake pads into the caliper
    • Put the caliper on
    • Thread the T47 bolts by hand
    • Tighten bolts to 30 foot-pounds
    • Push the wire clip onto the brake caliper
    • Replace the brake caliper caps
  7. step : Reattaching the Wheel (6:42)
    • Slide the wheel into place
    • Start the lug bolts by hand
    • Tighten the lug bolts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Tighten the lug nut covers
  8. step : Testing the Brakes (7:34)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Pick
  • Jack Stands
  • Floor Jack
  • Large C-Clamp
  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Bit
  • T47 Torx Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:02 min)

Tools List:

    General Tools

  • Pick
  • Jack Stands
  • Floor Jack
  • Large C-Clamp
  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Bit
  • T47 Torx Socket



This part replaces:

  • Reference Number CD1107
  • Reference Number 900468
  • Reference Number CD1108
  • Reference Number 900466
  • Hollander 533-50100
  • Hollander 530-50102

Vehicle Fit

  • 2006-2007 Audi A3 Front & Rear Premium Posi Ceramic Brake Kit
  • 2008 Audi A3 Front & Rear Premium Posi Ceramic Brake Kit for Models with 11.25" (286mm) Diameter Rear Rotors
  • 2009 Audi A3 Front & Rear Premium Posi Ceramic Brake Kit
  • 2006-2007 Audi A3 Quattro Front & Rear Premium Posi Ceramic Brake Kit
  • 2008 Audi A3 Quattro Front & Rear Premium Posi Ceramic Brake Kit for Models with 11.25" (286mm) Diameter Rear Rotors
  • 2009 Audi A3 Quattro Front & Rear Premium Posi Ceramic Brake Kit
  • 2009-2016 VW CC Front Wheel Drive Front & Rear Premium Posi Ceramic Brake Kit
  • 2007-2010 VW Eos Front & Rear Premium Posi Ceramic Brake Kit
  • 2006 VW GTI L4 2.0L Turbo Front & Rear Premium Posi Ceramic Brake Kit
  • 2007-2010 VW GTI Front & Rear Premium Posi Ceramic Brake Kit
  • 2011 VW GTI Front & Rear Premium Posi Ceramic Brake Kit for Models with 12.28" (312mm) Diameter Front Rotors 11.25" (286mm) Diameter Rear Rotors
  • 2005-2006 VW Jetta L5 2.5L Front & Rear Premium Posi Ceramic Brake Kit for Models with 11.25" (286mm) Diameter Rear Rotors 12.28" (312mm) Diameter Front Rotors
  • 2006-2009 VW Jetta TDI Front & Rear Premium Posi Ceramic Brake Kit for Models with 11.25" (286mm) Diameter Rear Rotors 12.28" (312mm) Diameter Front Rotors
  • 2007-2009 VW Jetta L4 2.0L Turbo Front & Rear Premium Posi Ceramic Brake Kit for Models with 12.28" (312mm) Diameter Front Rotors 11.25" (286mm) Diameter Rear Rotors
  • 2006-2007 VW Passat Front Wheel Drive L4 2.0L Turbo Front & Rear Premium Posi Ceramic Brake Kit
  • 2008-2010 VW Passat L4 2.0L Turbo Front & Rear Premium Posi Ceramic Brake Kit
Part #: 1ABFS03055

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More