Brake Pad Specifications:

  • 8 Piece Front & Rear Brake Pad Set
  • Direct replacement
  • Professional Grade CERAMIC Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a Set of 4
  • Includes LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fit 6 Stud Wheels
  • Direct replacements
  • Front 12" diameter
  • Rear 13" diameter

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:48)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:20)
    • Remove the 18mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Removing the Brake Rotor (2:54)
    • Spray the 21mm bolts with penetrating oil if rusted
    • Remove the 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Preparing the New Brake Pads and Rotors (5:05)
    • Clean the rotor with brake parts cleaner
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clip the brake pad slides to the caliper bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
  5. step : Installing the New Brake Rotor (6:55)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 100 foot-pounds of torque
  6. step : Installing the New Brake Pads (7:48)
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the bolts by hand
    • Tighten the bolts to 100 foot-pounds
  7. step : Reattaching the Wheel (9:25)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket
  8. step : Testing the Brakes (9:53)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • White Grease

  • Ratchets & Related

  • 3/8 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 21mm Socket
  • 22mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:18 min)

Tools List:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • White Grease

  • Ratchets & Related

  • 3/8 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 21mm Socket
  • 22mm Socket




Vehicle Fit

  • 2002 Cadillac Escalade Front & Rear Brake Kit Ceramic for Models with with Brake Rotor ID 15727134
  • 2003-2006 Cadillac Escalade 2 Wheel Drive Brake Kit Ceramic Front & Rear
  • 2003 Cadillac Escalade ESV 2 Wheel Drive Front & Rear Brake Kit Ceramic
  • 2002-2003 Cadillac Escalade EXT 2 Wheel Drive Front & Rear Brake Kit Ceramic
  • 2002-2006 Chevy Avalanche 1500 2 Wheel Drive Brake Kit Ceramic Front & Rear
  • 2007-2008 Chevy Express 1500 Van Brake Kit Ceramic Front & Rear
  • 2002 Chevy Suburban 1500 Front & Rear Brake Kit Ceramic for Models with with Brake Rotor ID 15727134
  • 2003-2006 Chevy Suburban 1500 Front & Rear Brake Kit Ceramic
  • 2002 Chevy Tahoe Front & Rear Brake Kit Ceramic for Models with with Brake Rotor ID 15727134
  • 2003-2006 Chevy Tahoe 2 Wheel Drive Front & Rear Brake Kit Ceramic
  • 2006-2008 GMC Savana 1500 Van Brake Kit Ceramic Front & Rear
  • 2002 GMC Yukon Front & Rear Brake Kit Ceramic for Models with with Brake Rotor ID 15727134
  • 2003-2006 GMC Yukon 2 Wheel Drive Front & Rear Brake Kit Ceramic
  • 2002 GMC Yukon XL 1500 Front & Rear Brake Kit Ceramic for Models with with Brake Rotor ID 15727134
  • 2003-2006 GMC Yukon XL 1500 2 Wheel Drive Front & Rear Brake Kit Ceramic
Part #: 1ABFS02710

Out of Stock

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More