Part Details

  • Kit Includes:
    (1) Rear Brake Shoe Set
    (2) Rear Brake Drums
  • Front or Rear Location: Rear

This rear brake drum & shoe kit is just what you need to get your vehicle stopping in good order again!

Brake Drum Specifications::

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part number: 15622362
  • Fit 6 Lug Wheels
  • Direct replacements
  • Built to strict quality control standards
  • 11-1/8" x 2-3/4" Brake Drums

Brake Shoe Specifications:

  • Comes as a Set of 4 Shoes
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Premium Bonded Brake Shoes
  • Direct replacements
  • Fit 11-1/8" x 2-3/4" Brake Drums

Note: This set contains enough pieces to do both sides on one rear axle - (2) rear brake drums & (1) rear brake shoe set.

This rear brake drum & shoe kit makes a great replacement and has excellent value over the price of dealer brake shoes & brake drums.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:03)
    • Raise and Secure the Vehicle
    • Remove the Lug Nuts
    • Remove the Rear Wheel
  2. step : Accessing the Wheel Cylinder (1:17)
    • Pull off the brake drum
    • Remove the springs with vise grips. The longer one is the front spring.
  3. step : Removing the Wheel Cylinder (1:43)
    • Disconnect the brake line using a wrench or vise grips
    • Be careful not to twist the brake line
    • Remove the wheel cylinder bolts
    • Pull out the wheel cylinder
    • Put the wheel cylinder plungers aside to reuse
  4. step : Replacing the Wheel Cylinder (3:23)
    • Put the wheel cylinder in place
    • Start reconnecting the brake line nut by hand
    • Start the wheel cylinder bolts by hand
    • Tighten the bolts to 20 foot-pounds with a socket
  5. step : Replacing the Brakes (4:22)
    • Attach the plungers
    • Reattach the front spring with the vise grip
    • Reattach the rear spring with the vise grip
    • Replace the Brake Drum
  6. step : Bleeding the Brakes (6:08])
    • Run a hose into a plastic bottle or drain pan
    • Attach the hose to the bleeder valve
    • Enlist the help of an assistant
    • Instruct the assistant to press the brake pedal
    • Release the bleeder with a wrench
    • Tighten the bleeder
    • Instruct the assistant to release the brake pedal
    • Repeat until no more air flows
    • Repeat this process for each wheel
  7. step : Replacing the Wheel (7:37)
    • Replace the wheel
    • Tighten the lug nuts
    • Let the vehicle down to the ground
  8. step : Road Test the Vehicle (7:41)
    • Press the brake pedal
    • Put the vehicle into gear
    • Check that the brakes hold with the vehicle in gear
    • Test the brakes at low speeds before testing on the road
    • Test the brakes on the road

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Drain Pan
  • Assistant
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rubber Vacuum Hose

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Sockets - SAE

  • 3/8 Inch Socket

  • Wrenches - SAE

  • 3/8 Inch Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1976-1982Chevy Blazer Full Size Chevy Blazer Full Size Rear Wheel Drive Brake Kit Rear
1988-1991Chevy Blazer Full Size Chevy Blazer Full Size Rear Brake Kit
1978-1986Chevy C10 Truck Chevy C10 Truck Brake Kit Rear for 11.125 x 2.75 Inch Drums
1974-1986Chevy K10 Truck Chevy K10 Truck Rear Brake Kit for Models with 11.125 x 2.75 Inch Drums
1974-1986Chevy Suburban C10 Chevy Suburban C10 Brake Kit Rear for 11.125 x 2.75 Inch Drums
1987-1988Chevy Suburban V10 Chevy Suburban V10 4 Wheel Drive Rear Brake Kit for Models with 11.125 x 2.75 Inch Drums
1976-1980Chevy Van - P Series Forward Control Chevy Van - P Series Forward Control P10 Brake Kit Rear
1974-1989Chevy Van G-Series Chevy Van G-Series G20 G2500 Brake Kit Rear
1974-1989Chevy Van G-Series Chevy Van G-Series G10 Brake Kit Rear for 11.125 x 2.75 Inch Drums
1978-1986GMC C1500 Truck GMC C1500 Truck Brake Kit Rear for 11.125 x 2.75 Inch Drums
1976-1982GMC Jimmy Full Size GMC Jimmy Full Size Rear Wheel Drive Brake Kit Rear
1988-1991GMC Jimmy Full Size GMC Jimmy Full Size Rear Brake Kit
1974-1986GMC K1500 Truck GMC K1500 Truck Rear Brake Kit for Models with 11.125 x 2.75 Inch Drums
1974-1986GMC Suburban C1500 GMC Suburban C1500 Brake Kit Rear for 11.125 x 2.75 Inch Drums
1974-1989GMC Van GMC Van G2500 Brake Kit Rear
1974-1989GMC Van GMC Van G1500 Brake Kit Rear for 11.125 x 2.75 Inch Drums
1976-1980GMC Van - P Series Forward Control GMC Van - P Series Forward Control P1500 Brake Kit Rear
Only 2 left in stock
Part #: 1ABDS00273


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:25 min)