Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Kit Includes:
      (1) Rear Brake Shoe Set
      (1) Rear Brake Hardware Kit
      (2) Rear Brake Drums

This brake drum, shoes & hardware set is just what you need to get your vehicle stopping in good order again!

Rear Drum Specifications:

  • Comes as a PAIR
  • Fits both the LH (Driver) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 15606280, 15693455, 18018680
  • Direct replacement
  • Fits 5 stud wheels
  • Size: 9-1/2" x 2"

Rear Brake Shoe Specifications:

  • Comes as a Set
  • Fits both the LH (Driver Side) & RH (Passenger Side) REAR
  • Premium Grade Brake Shoes
  • Direct replacements
  • Correct for Drum Size: 9-1/2" x 2"

Rear Brake Hardware Specifications:

  • Will service both LH (Driver Side) & RH (Passenger Side) REAR
  • Kit includes:
    • 10 Springs
    • 6 Retainers
    • 4 Pins
  • Direct replacements
  • Built to strict quality control standards
  • Correct for Drum Size: 9-1/2" x 2"

This brake drum, shoes & hardware set makes a great replacement and has an excellent value over the price of dealer shoes & brake drums.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheels (1:10)
    • Use a 19mm socket to remove the lug nut covers.
    • Loosen the lug nuts.
    • Raise the vehicle.
    • Remove the lug nuts and the wheel.
  2. step : Removing the Brakes (1:39)
    • Spray them with penetrating oil.
    • Remove the locking tabs around the bolts.
    • Hit the brake on the front with a hammer to loosen it. Pry with a screwdriver once loosened.
    • Use vise-grips to lock on to the spring. Pull the spring out and down and remember what spring goes where.
    • Remove the other spring the same way as the last.
    • Pull the lever down and pull the lever across from it off.
    • Hold the back of the pin that holds on the shoes. Using the vise-grips push and twist the other side. Do the same with the other pin.
    • Take the brake shoes off.
    • Make sure there is not a leak near the wheel cylinder.
  3. step : Taking the Brakes Apart (6:56)
    • Separate the shoes
    • Pull the adjuster from the shoes.
    • Clean the threads on the adjuster and coat with anti-seize.
    • Make sure it spins easily.
  4. step : Preparing the New Brakes (8:07)
    • Match up the old springs with the news springs.
    • The larger shoe is the rear shoe.
    • Attach the shoes with the spring and adjuster.
    • Put anti-seize on all the places the shoes contact.
  5. step : Installing New Brakes (9:16)
    • Put the emergency brake bracket into the triangle slot on the brake shoes.
    • Put the shoes on to the wheel
    • Put the pins in through the back of the shoes.
    • Replace the spring using the vise-grips to pull it into place.
    • Put the adjusting arm with the new cup into place. Reinsert the pin
    • Attach the shorter spring to the lever.
    • Put the opposite lever into place.
    • Slide the emergency brake separator back into place.
    • Reinsert the remaining springs using the vise-grips.
    • Put the small spring back under the larger lever
    • Replace the drum. Use the adjuster to expand the shoes so that it will fit properly. You want the drum to slide on with a little drag.
  6. step : Replacing the Wheel (15:01)
    • Put the wheel into place.
    • Thread the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft/lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Large Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 19mm Socket

  • Specialty Tools

  • Vise-Grips

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1992-1997Chevy Blazer S10 Chevy Blazer S10 Rear Brake Kit
1993-1997Chevy Camaro Chevy Camaro Rear Brake Kit
1992-2003Chevy S10 Pickup Chevy S10 Pickup Rear Brake Kit
1992-1997GMC Jimmy S-15 GMC Jimmy S-15 Rear Brake Kit
1992-2003GMC S-15 Sonoma GMC S-15 Sonoma Rear Brake Kit
1992-1993GMC Typhoon GMC Typhoon Rear Brake Kit
1996-2000Isuzu Hombre Isuzu Hombre Rear Brake Kit
1992-1996Oldsmobile Bravada Olds Bravada Rear Brake Kit
1993-1997Pontiac Firebird Pontiac Firebird Rear Brake Kit
Part #: 1ABDS00078


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(15:41 min)