Replaces

Brake Kit Rear Nakamoto CD898, 52009968AC - 1ABFS02132

Brake Pad Specifications:

  • 4 Piece Rear Brake Pad Set
  • Includes shims
  • Direct replacements
  • Professional Grade Ceramic Disc Brake Pads

Brake Rotor Specifications:

  • Come as a Pair
    • Fits both LH (Driver Side) & RH (Passenger Side) Rear
  • Fit 5 Stud Wheels
  • 13.86" Diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:49)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:59)
    • Remove the 10mm bolts from the brake caliper slides
    • Pry the caliper out of the bracket from the bottom with a pry bar
    • Remove the two 21mm bolts securing the caliper bracket
    • Remove the caliper and brake pads
    • If only changing the pads, continue to Step 5
  3. step : Removing the Brake Rotor (2:59)
    • Hit the rotor with a hammer without damaging the studs
    • Remove the rotor
  4. step : Preparing the New Brake Pads and Rotors (4:16)
    • Remove surface rust or scaling from the hub with a wire brush
    • Apply brake grease to the hub without touching the studs
    • Insert the rotor into place
    • Remove the brake pad clips
    • Clean the surface on the caliper and the brake pad clips with a steel wire brush
    • Apply brakes parts cleaner to the rotor
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
  5. step : Reinstalling the Brake Caliper (6:58)
    • Insert the two 21mm bolts into the caliper
    • Torque the 21mm bolts to 100 foot-pounds
    • Apply grease to the brake pad tabs
    • Insert the brake pads into the caliper bracket
    • Apply brake grease to the back of the pads
    • Push the slides out of the caliper with vise grips if needed
    • Apply brake grease to the slides
    • Insert the slides into the caliper
    • Slowly compress the piston into the caliper to prevent forcing fluid or blowing a seal with vise grip pliers
    • Insert the caliper onto the bracket
    • Insert and tighten the 10mm bolts
    • Torque the caliper bolts to 22 foot-pounds
  6. step : Reattaching the Wheel (9:43)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket
  • 10mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Happy Stopping.
Quality parts, easy repair, quick shipment. I'll be back. Thanks.
March 3, 2017
Purchased
1 year ago
Brake Kit
Order was great. Shipping was great. Completely satisfied.
Would recommend to others.
October 17, 2017
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:44 min)

Tools List:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket
  • 10mm Socket



This part replaces:

  • Nakamoto CD898, 52009968AC

Vehicle Fit

  • 2007-2009 Chrysler Aspen Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2004-2009 Dodge Durango Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2002-2003 Dodge Ram 1500 Truck Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2004 Dodge Ram 1500 Truck Rear Premium Posi Ceramic Brake Kit excluding SRT-10 Nakamoto
  • 2009-2010 Dodge Ram 1500 Truck Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2011-2016 Ram 1500 Truck Rear Premium Posi Ceramic Brake Kit Nakamoto
Part #: 1ABFS02132

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD898, 52009968AC

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More