Brake Kit Nakamoto MD883, MD1169, 55073, 55112 - 1ABFS02689

Brake Pad Specifications:

  • 4 Piece Front & Rear Brake Pad Set
  • Direct replacements
  • Professional Grade SEMI-METALLIC Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a Set of 4
  • Fits both LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fits 6 Lug Wheels
  • Front 11.9" (302mm) diameter
  • Rear 12.8" (325 mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:15)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 19mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 19mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the rear brake calipers (1:46)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 14mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 18mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Screw in the two 10M bolts to remove the rotor.
    • Take care not to damage the lug studs.
  3. step : Install new rear brake rotor and pads (6:30)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 90-100 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 15-20 ft lbs.
  4. step : Put the rear wheel back on (10:25)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 100 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (11:00)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • M10 x 7cm bolts
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 18mm Socket
  • 19mm Socket

4.0 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Brakes and Pads
Other than the short stamp on the brake pad which left a small lip that I had file off to fit the other three went one awesome. We highly recommend this product and are completely satisfied with the products. We would buy from them again.
February 1, 2017
1 year ago
The parts I ordered were correct and in perfect condition when they arrived. Th vehicle drives so much nicer now. Thank you for great service and at a terrific price.
September 26, 2017
8 months ago
Great product
This kit installed easy and was a perfect fit.
Pads were quiet and stopped the vehicle well.
The service and shipping were very professional from 1A Auto
February 17, 2018
3 months ago
great parts
Great parts and perfect fit I will definitely use your web site again and tell all my mechanic buddies about this site.
March 6, 2017
1 year ago
Never recieved them
Dont know how it works but i never got the product and i would like a refund cause of it tired of these online parts sites not sending products
July 10, 2017
Response from 1A Auto
We are sorry to hear of your experience. Please contact us at your convenience to resolve this matter. Our tracking information shows delivery at the rear door on 06/29/2017. We want to ensure that your parts are received and proper so your vehicle may get repaired.
July 10, 2017
Alex P Staff
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Will these rotors work in the 07 SS model?
Grinder on Oct 4, 2017
BEST ANSWER: I can't say for certain...but I would assume they would...mine is a LS...not sure what the difference would be...other than the SS has more power...hope this helps.

Vehicle Fit

  • 2006-2007 Buick Rainier Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2006-2009 Chevy Trailblazer Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2006-2009 GMC Envoy Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2007-2008 Isuzu Ascender Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2007-2009 Saab 9-7X Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto

This part replaces:

  • Nakamoto MD883, MD1169, 55073, 55112
Part #: 1ABFS02689

Brand #: MD883, MD1169, 55073, 55112

How-to Video:

(11:30 min)