Brake Pad Specifications:

  • 4 Piece Front Brake Pad Set
  • Direct replacement
  • Professional Grade Semi Metallic Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a matched Pair
    • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Pad Bonding Type: Premium Posi
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Friction Material: Semi-Metallic
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Front Brake Rotor Specifications: 11.06" (281mm)
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 5 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:57)
    • Loosen the lug nuts on the wheel.
    • Jack the car up.
    • Remove the lug nuts and the wheel.
    • If it won’t move put a couple lug nuts on partially and hit the top of the wheel to break it free. Then remove the lug nuts and pull the wheel off.
  2. step : Removing the Brake Caliper (1:28)
    • Check the rotor. If the rotor is rough it needs to be replaced.
    • Turn the wheel.
    • Remove the two bolts from the back of the caliper using a T45 torx bit or Allen bit.
    • Place a screwdriver into the hole on the side of the caliper. Pry the caliper.
    • Pry off the bracket to remove the caliper.
    • Remove the inner brake shoe.
    • Wire tie the caliper up.
  3. step : Remove the Rotor (3:53)
    • Remove the two 21mm bolts from the back of the bracket using a breaker bar or pipe for leverage.
    • Slide the bracket off.
    • Remove the locks around the bolts if they are there.
    • Coat the disk with penetrating oil.
    • Partially replace a couple lug nuts and hit the disk to break it free.
    • Remove the lug nuts and disk.
  4. step : Replace the Front Brakes (5:26)
    • Slide the rotor into place.
    • Put the bracket onto the rotor. Secure it with the two bolts. Tighten to 120ft/lbs.
    • Clip the wire ties and pull the caliper down.
    • Put the old pad back in to the caliper and tighten with a C-Clamp to push the piston back in.
    • Put the pads into place with the clips to secure them.
    • Put the caliper into place on the rotor.
    • Slide the bracket into the caliper.
    • Place the bolts onto the back and tighten to 30ft/lbs.
  5. step : Replacing the Wheels (8:37)
    • Remove the lug nuts.
    • Put the wheel back into place.
    • Replace the lug nuts and tighten them in a star pattern.
    • Put the car on the ground and tighten the lug nuts to 100ft/lbs in a star pattern
  6. step : Preparing the Brake (9:02)
    • Before driving pump the brakes until they become firm.
    • Test at low speeds that the brakes work before driving on the road.

Tools needed for replacement:

    General Tools

  • Large Hammer
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T45 Torx Socket

  • Wrenches - Metric

  • 19mm Wrench
  • 21mm wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2002 Chrysler Town & Country Front Premium Posi Brake Kit Cross Drilled & Slotted Zinc Coated for Models with 4 Wheel Disc Brakes Semi-Metallic Performance Nakamoto
  • 2003-2004 Chrysler Town & Country Front Premium Posi Brake Kit Cross Drilled & Slotted Zinc Coated for Models with 4 Wheel Disc Brakes Semi-Metallic Performance Nakamoto
  • 2003-2004 Chrysler Town & Country Front Premium Posi Brake Kit Cross Drilled & Slotted Zinc Coated for Models with Rear Drum Brakes & without ABS Brakes Semi-Metallic Performance Nakamoto
  • 2005-2007 Chrysler Town & Country Front Premium Posi Brake Kit Cross Drilled & Slotted Zinc Coated for Models with 4 Wheel Disc Brakes Semi-Metallic Performance Nakamoto
  • 2001-2002 Dodge Caravan Front Premium Posi Brake Kit Cross Drilled & Slotted Zinc Coated for Models with 4 Wheel Disc Brakes Semi-Metallic Performance Nakamoto
  • 2003-2004 Dodge Caravan Front Premium Posi Brake Kit Cross Drilled & Slotted Zinc Coated for Models with Rear Drum Brakes & without ABS Brakes Semi-Metallic Performance Nakamoto
  • 2003-2004 Dodge Caravan Front Premium Posi Brake Kit Cross Drilled & Slotted Zinc Coated for Models with 4 Wheel Disc Brakes Semi-Metallic Performance Nakamoto
  • 2005-2007 Dodge Caravan Front Premium Posi Brake Kit Cross Drilled & Slotted Zinc Coated for Models with 4 Wheel Disc Brakes Semi-Metallic Performance Nakamoto
  • 2001-2002 Dodge Grand Caravan Front Premium Posi Brake Kit Cross Drilled & Slotted Zinc Coated for Models with 4 Wheel Disc Brakes Semi-Metallic Performance Nakamoto
  • 2003-2004 Dodge Grand Caravan Front Premium Posi Brake Kit Cross Drilled & Slotted Zinc Coated for Models with 4 Wheel Disc Brakes Semi-Metallic Performance Nakamoto
  • 2003-2004 Dodge Grand Caravan Front Premium Posi Brake Kit Cross Drilled & Slotted Zinc Coated for Models with Rear Drum Brakes & without ABS Brakes Semi-Metallic Performance Nakamoto
  • 2005-2007 Dodge Grand Caravan Front Premium Posi Brake Kit Cross Drilled & Slotted Zinc Coated for Models with 4 Wheel Disc Brakes Semi-Metallic Performance Nakamoto

This part replaces:

  • Nakamoto MD857, 53004-DSZ
Part #: 1APBS00666

Nakamoto
Brand #: MD857, 53004-DSZ

How-to Video:

(09:27 min)