Kit specifications:

  • Includes 2 front rotors & a front brake pad set
  • Fits Driver & Passenger Side Front
  • Rotors with 5 lug holes
  • Semi-Metallic brake pads
  • Direct replacements

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Note:
The rotors do not include wheel bearings or seals.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:13)
    • Remove hub cap or center cap if you have it
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts
    • Jack up and secure your car with jack stands
    • Remove the lug nuts with your 22mm socket and ratchet
    • Remove the wheel and set aside
  2. step : Removing the Calipers (1:35)
    • Remove the two 5/16 Allen bolts securing the caliper
    • Use a screwdriver to force the pistons back in
    • Use a screwdriver to pry off the caliper
    • Use a wire tie to fasten the caliper out of the way
    • Use your 21mm socket and ratchet to remove the caliper bracket
    • Use your screwdriver to pry out your brake pads
    • Pull off the brake rotor
    • Hit the rotor with a rubber mallet or hammer if necessary
    • Take care not to damage the lug studs
  3. step : Install New Rotor and Pads (5:18)
    • Check the caliper piston's condition and clean them with a wire brush if necessary
    • Clean new rotor with brake cleaner
    • Put your caliper bracket back on, and tighten the 21 mm bolts to 120 ft lbs
    • Insert your new pads into the brackets
    • Compress the caliper piston with a C-clamp
    • Mount your bracket back on and tighten the 5/16 Allen bolts to 20-25ft lbs
  4. step : Replacing the Wheel (9:20)
    • Replace hubcap/center cap
    • Make sure to use a star pattern when putting your wheel lugs back on
    • Tighten to 100 ft lbs
  5. step : Test and Set Brakes (10:30)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place
    • Test the brakes in your driveway before taking the car onto the road
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph
    • This is best done on a straight back road without any traffic

Tools needed for replacement:

    Allen Wrenches

  • 5/16 Inch Allen Wrench

  • General Tools

  • Jack Stands
  • Large C-Clamp
  • Floor Jack
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Wire Ties
  • Anti-Seize Grease

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(11:03 min)

Tools List:

    Allen Wrenches

  • 5/16 Inch Allen Wrench

  • General Tools

  • Jack Stands
  • Large C-Clamp
  • Floor Jack
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Wire Ties
  • Anti-Seize Grease

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket



This part replaces:

  • Nakamoto MD857, 53002

Vehicle Fit

  • 2001-2002 Chrysler Town & Country 4 Wheel Disc Brakes Front Premium Posi Semi-Metallic Brake Kit for Models with Nakamoto
  • 2003-2004 Chrysler Town & Country Rear Drum Brakes without ABS Brakes Front Premium Posi Semi-Metallic Brake Kit for Models with Nakamoto
  • 2003-2004 Chrysler Town & Country 4 Wheel Disc Brakes Front Premium Posi Semi-Metallic Brake Kit for Models with Nakamoto
  • 2005-2007 Chrysler Town & Country 4 Wheel Disc Brakes Front Premium Posi Semi-Metallic Brake Kit for Models with Nakamoto
  • 2001-2002 Dodge Caravan 4 Wheel Disc Brakes Front Premium Posi Semi-Metallic Brake Kit for Models with Nakamoto
  • 2003-2004 Dodge Caravan 4 Wheel Disc Brakes Front Premium Posi Semi-Metallic Brake Kit for Models with Nakamoto
  • 2003-2004 Dodge Caravan Rear Drum Brakes without ABS Brakes Front Premium Posi Semi-Metallic Brake Kit for Models with Nakamoto
  • 2005-2007 Dodge Caravan 4 Wheel Disc Brakes Front Premium Posi Semi-Metallic Brake Kit for Models with Nakamoto
  • 2001-2002 Dodge Grand Caravan 4 Wheel Disc Brakes Front Premium Posi Semi-Metallic Brake Kit for Models with Nakamoto
  • 2003-2004 Dodge Grand Caravan Rear Drum Brakes without ABS Brakes Front Premium Posi Semi-Metallic Brake Kit for Models with Nakamoto
  • 2003-2004 Dodge Grand Caravan 4 Wheel Disc Brakes Front Premium Posi Semi-Metallic Brake Kit for Models with Nakamoto
  • 2005-2007 Dodge Grand Caravan 4 Wheel Disc Brakes Front Premium Posi Semi-Metallic Brake Kit for Models with Nakamoto
Part #: 1ABFS00049

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD857, 53002

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More