Brake Pad Specifications:

  • Premium Posi Semi-Metallic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched Pair
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • Vented
  • 11.65" (296mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (0:55)
    • Loosen the lug nuts with your lug wrench.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the old brakes. (1:05)
    • Check the thickness of your brake pads, and observe your rotors for deep gouges or excessive wear.
    • Loosen the caliper bolts with your 14 mm socket and ratchet.
    • Pry out the brake pads and brake pad brackets.
    • Use your 22 mm socket and breaker bar to unbolt the caliper bracket.
    • Remove the old brake rotor.
  3. step : Install the new brakes (2:33)
    • Clean the brake rotor with brake parts cleaner.
    • Use a wire brush to clean up the brake caliper bracket and the brake pad brackets.
    • Install the new brake rotor, and secure it in place while you install the calipers with a lug nut.
    • Put the caliper and brake pad brackets onto the rotor.
    • Bolt the caliper bracket down with your 22 mm wrench and torque the bolts to 100 ft lbs.
    • Apply anti-seize grease to the edges of your brake pads where they contact the brake pad brackets.
    • Use a large c-clamp to compress the caliper and mount it onto the caliper bracket.
    • Tighten the 14 mm bolts to 25 ft lbs.
    • Remove the lug nut you used to hold the rotor steady.
  4. step : Put the wheel back on (5:50)
    • Mount the wheel and hand tighten the lug nuts
    • Lower the vehicle and use a star pattern to torque the lug nuts to 100 ft lbs.
    • Pump your brakes and do a couple test stops in the driveway before test driving.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 22mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(06:42 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 22mm Socket
  • 21mm Socket



This part replaces:

  • Nakamoto MD815, 31306-DSZ

Vehicle Fit

  • 2002-2004 Infiniti I35 Front Cross Drilled & Slotted Zinc Coated Brake Kit Semi-Metallic Premium Posi Performance Nakamoto
  • 2002-2004 Nissan Altima Front Cross Drilled & Slotted Zinc Coated Brake Kit Semi-Metallic Premium Posi Performance Nakamoto
  • 2005-2006 Nissan Altima Front Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic excluding SE-R Performance Nakamoto
  • 2002-2003 Nissan Maxima Front Cross Drilled & Slotted Zinc Coated Brake Kit Semi-Metallic Premium Posi Performance Nakamoto
Part #: 1APBS00369

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD815, 31306-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More