Replaces

Brake Kit Nakamoto MD785, MD784, 55062-DSZ, 55055-DSZ - 1APBS00238

This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Semi-Metallic brake pads
  • 8 Piece front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a set of 4
    • Includes both LH (Driver) & RH (Passenger) Side FRONT & REAR
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 8 Lug Wheel

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:22)
    • Remove hub cap or center cap if you have it, using a 21mm socket if needed.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the calipers (2:00)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 18mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 21mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Screw in the two 10M bolts into the rotor till it pulls it off.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Install new rotor and pads (7:45)
    • Clean new rotor with brake cleaner.
    • Clean hub with a wire brush.
    • Use a little anti-seize to keep the rotor from seizing to the hub.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 120 ft lbs.
    • Compress the caliper piston with a c-clamp and block of wood to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 90 ft lbs.
    • Use a little anti-seize to keep the rotor from seizing to the hub.
  4. step : Put wheel back on (12:50)
    • Use a little anti-seize to keep the wheel from seizing to the rotor.
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 120 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (13:20)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 16mm Socket
  • 18mm Socket
  • 22mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(14:05 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 16mm Socket
  • 18mm Socket
  • 22mm Socket



This part replaces:

  • Nakamoto MD785, MD784, 55062-DSZ, 55055-DSZ

Vehicle Fit

  • 2001-2003 Chevy Silverado 2500 HD Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic for Models with Full Floating Axle Performance Nakamoto
  • 2004 Chevy Silverado 2500 HD Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic for Models with Full Floating Axle without Quadrasteer Performance Nakamoto
  • 2005-2010 Chevy Silverado 2500 HD Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic excluding 8600LB GVW Performance Nakamoto
  • 2007 Chevy Silverado 2500 HD Classic Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic excluding 8600LB GVW Performance Nakamoto
  • 2006-2010 Chevy Silverado 3500 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic 9900LB GVW Single Rear Wheels (SRW) Performance Nakamoto
  • 2007 Chevy Silverado 3500 Classic Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic 9900LB GVW Single Rear Wheels (SRW) Performance Nakamoto
  • 2001-2003 GMC Sierra 2500 HD Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic for Models with Full Floating Axle Performance Nakamoto
  • 2004 GMC Sierra 2500 HD Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic for Models with Full Floating Axle without Quadrasteer Performance Nakamoto
  • 2005-2010 GMC Sierra 2500 HD Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic excluding 8600LB GVW Performance Nakamoto
  • 2007 GMC Sierra 2500 HD Classic Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic excluding 8600LB GVW Performance Nakamoto
  • 2006-2010 GMC Sierra 3500 Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic 9900LB GVW Single Rear Wheels (SRW) Performance Nakamoto
  • 2007 GMC Sierra 3500 Classic Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic 9900LB GVW Single Rear Wheels (SRW) Performance Nakamoto
Part #: 1APBS00238

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD785, MD784, 55062-DSZ, 55055-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More