Replaces

Brake Kit Nakamoto MD785, MD784, 55062, 55055 - 1ABFS02038

Brake Rotor Specifications:

  • Come as a Set of 4
  • Fits both the LH (Driver) & RH (Passenger) Side Front & Rear
  • Fits 8 Stud Wheels
  • Front 8.5"
  • Rear 13" x 1.14"
Brake Pad Specifications:
  • Premium Posi Semi-Metallic Disc Brake Pads
  • 8 Piece Front & Rear brake pad set
  • Direct replacement
  • Front Pad Length: 8.5 Inches
  • Rear Pad Length: 7 Inches

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:22)
    • Remove hub cap or center cap if you have it, using a 21mm socket if needed.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the calipers (2:00)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 18mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 21mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Screw in the two 10M bolts into the rotor till it pulls it off.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Install new rotor and pads (7:45)
    • Clean new rotor with brake cleaner.
    • Clean hub with a wire brush.
    • Use a little anti-seize to keep the rotor from seizing to the hub.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 120 ft lbs.
    • Compress the caliper piston with a c-clamp and block of wood to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 90 ft lbs.
    • Use a little anti-seize to keep the rotor from seizing to the hub.
  4. step : Put wheel back on (12:50)
    • Use a little anti-seize to keep the wheel from seizing to the rotor.
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 120 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (13:20)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 16mm Socket
  • 18mm Socket
  • 22mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
BRAKE PAD / ROTOR KIT
THE PARTS ARRIVED WHEN EXPECTED IN GOOD CONDITION. ALL PARTS WERE WELL FINISHED AND FIT LIKE ORIGINAL. I HAVE ONLY DRIVEN A COUPLE OF DAYS W3ITH THE NEW PARTS ON BUT THEY WORK PERFECTLY SO FAR.
February 3, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
does this fit with dual rear wheels?
Timothy D on Apr 3, 2016
BEST ANSWER: There are too many specs per model for me to accurately answer this question.
Need GVW and fit measurements Front 8.5"
Rear 13" x 1.14"

How-to Video:

(14:05 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 16mm Socket
  • 18mm Socket
  • 22mm Socket



This part replaces:

  • Nakamoto MD785, MD784, 55062, 55055

Vehicle Fit

  • 2001-2003 Chevy Silverado 2500 HD Front & Rear Premium Posi Semi-Metallic Brake Kit with Full Floating Axle Nakamoto
  • 2004 Chevy Silverado 2500 HD Front & Rear Premium Posi Semi-Metallic Brake Kit with Full Floating Axle without Quadrasteer Nakamoto
  • 2005 Chevy Silverado 2500 HD Crew Cab Front & Rear Premium Posi Semi-Metallic Brake Kit excluding 8600LB GVW Nakamoto
  • 2005 Chevy Silverado 2500 HD Front & Rear Premium Posi Semi-Metallic Brake Kit excluding Crew Cab Nakamoto
  • 2006-2008 Chevy Silverado 2500 HD Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2007 Chevy Silverado 2500 HD Classic Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2004-2008 Chevy Silverado 3500 Front & Rear Premium Posi Semi-Metallic Brake Kit with 9900LB GVW Nakamoto
  • 2007 Chevy Silverado 3500 Classic Front & Rear Premium Posi Semi-Metallic Brake Kit with 9900LB GVW Nakamoto
  • 2001-2003 GMC Sierra 2500 HD Front & Rear Premium Posi Semi-Metallic Brake Kit with Full Floating Axle Nakamoto
  • 2004 GMC Sierra 2500 HD Front & Rear Premium Posi Semi-Metallic Brake Kit with Full Floating Axle without Quadrasteer Nakamoto
  • 2005 GMC Sierra 2500 HD Crew Cab Front & Rear Premium Posi Semi-Metallic Brake Kit excluding 8600LB GVW Nakamoto
  • 2005 GMC Sierra 2500 HD Front & Rear Premium Posi Semi-Metallic Brake Kit excluding Crew Cab Nakamoto
  • 2006-2008 GMC Sierra 2500 HD Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2007 GMC Sierra 2500 HD Classic Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2004-2008 GMC Sierra 3500 Front & Rear Premium Posi Semi-Metallic Brake Kit with 9900LB GVW Nakamoto
  • 2007 GMC Sierra 3500 Classic Front & Rear Premium Posi Semi-Metallic Brake Kit with 9900LB GVW Nakamoto
Part #: 1ABFS02038

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD785, MD784, 55062, 55055

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More