Brake Pad Specifications:

  • Premium Posi Semi Metallic Disc Brake Pads
  • 4 Piece rear brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a matched Pair
    • Includes LH (Driver Side) & RH (Passenger Side) Rear
  • Direct replacement
  • Fit 5 Lug Wheels
  • 10.64" (270mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Brake Pad Friction Material: Semi-Metallic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Rear Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Specifications: Solid
  • Rear Brake Rotor Specifications: 10.63" (270mm)
  • Rear Brake Rotor Specifications: 5 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:29)
    • Pry the pads into the caliper with a pry bar to reset the pistons
    • Remove the two 10mm bolts from the brake caliper
    • Pull the caliper aside
    • Unclip the brake pads from the caliper
    • Pull the brake pads out of the caliper
  3. step : Inspecting the Brakes (3:03)
    • Check the thickness of the brake pads
    • Check that the brake caliper slides move smoothly
    • Check for gouges on both sides of the brake rotor
  4. step : Removing the Brake Rotor (3:44)
    • Slide off the brake rotor
    • If the rotor does not come off easily, adjust the emergency brake
    • Pull off the rubber plug from the backing plate with a flat blade screwdriver
    • Turn the star wheel adjuster down with a brake spoon
  5. step : Installing the New Brake Rotor (5:10)
    • Slide on the brake rotor
    • Turn the star wheel adjuster up with a brake spoon, while turning the rotor
    • Push the rubber plug into the backing plate
  6. step : Installing the New Brake Pads (5:41)
    • Push the brake pads into the caliper
    • Put the caliper into place
    • Start the 10mm bolts into the caliper
    • Tighten the 10mm bolts to about 20 foot-pounds of torque
  7. step : Reattaching the Wheel (7:59)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 90 - 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket

  • Specialty Tools

  • Brake Spoon

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1999-2004Chrysler 300M Chrysler 300M Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
1995-1997Chrysler Concorde Chrysler Concorde Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
1998-1999Chrysler Concorde Chrysler Concorde 16 Inch Wheels Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
2000-2004Chrysler Concorde Chrysler Concorde Aluminum Wheels Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
1995-1997Chrysler LHS Chrysler LHS Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
1999-2001Chrysler LHS Chrysler LHS Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
1995-1996Chrysler New Yorker Chrysler New Yorker Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
1995-1997Dodge Intrepid Dodge Intrepid Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
1998-1999Dodge Intrepid Dodge Intrepid 16 Inch Wheels Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
2000-2004Dodge Intrepid Dodge Intrepid Aluminum Wheels Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
1995-1997Eagle Vision Eagle Vision Rear Premium Posi Semi-Metallic Brake Kit Nakamoto

This part replaces:

  • OE # 4582225, 4779111AC
  • FMSI D759
  • Hollander 533-02364, 533-02226
  • Nakamoto MD759, 4582225
Part #: 1ABFS02067


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: MD759, 4582225

How-to Video:

(08:54 min)