Replaces

Brake Kit Nakamoto MD699, MD714, 55034, 18040482 - 1ABFS02729

Brake Pad Specifications:

  • Semi Metallic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a Set of 4
    • Includes LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fits 5 Lug Wheel
  • 11.92" (302mm) diameter vented front
  • 11.72" (297mm) diameter solid rear

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:15)
    • Pry up the center cap with a cloth and flat blade screwdriver.
    • Loosen the lug nuts with a breaker bar and 19 mm socket or lug wrench.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. step : remove the brake pads and rotor (2:00)
    • Observe the wear on your brakes.
    • Remove the 15 mm bolts on the caliper with your socket and breaker bar.
    • Use a flat blade screwdriver to pry between the rotor and brake pad in order to compress the caliper piston.
    • Pry off the caliper and use a c-clamp to compress the piston.
    • Tuck the caliper out of the way.
    • Remove the brake pads and remove the caliper bracket by unbolting the 15 mm caliper bracket bolts with your socket and breaker bar.
    • Use a wire brush to clean up the caliper bracket.
    • Remove the rotor.
  3. step : Install the new rotor and brake pads. (6:35)
    • Clean the rotor with brake cleaner.
    • Mount the rotor onto the hub.
    • Install the caliper bracket and torque the 15 mm bolts to 85 ft lbs.
    • Clean up the slides that mount onto the caliper brackets for the brake pads with a wire brush.
    • Mount your new pads, dabbing a bit of anti-seize grease where the pads meet the slides.
    • Put the caliper back on, and torque down the two 15 mm bolts to 25 to 30 ft lbs.
  4. step : Replace the wheel (9:50)
    • Hand-tighten the lug nuts and lower the vehicle
    • Torque the lug nuts to 100 ft lbs in a star pattern.
    • Pump your brakes to reset the caliper pistons.
    • Do a couple test stops in the drive way before test driving the vehicle.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 15mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Smooth transaction, fast shipping, excellent product.
I observed finding items and purchasing from thie web site to ne quick and easy.

Once I ordered parts, the ink was barely dry on the invoice when the items arrived at my door. The parts were well and securely packaged and of superb quality.

This was an excellent transaction. I would strongly recommend to all.
April 11, 2018
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2003-2005 Buick Park Avenue Ultra Front & Rear Semi-Metallic Premium Posi Brake Kit Nakamoto
  • 2000-2004 Cadillac Deville Front & Rear Brake Kit for Models with 5 Lug Wheels without Heavy Duty Brakes Semi-Metallic Premium Posi Nakamoto
  • 2005 Cadillac Deville (Built Before VIN 5U129030) Front & Rear Brake Kit 5 Lug Wheels with without Heavy Duty Brakes Semi-Metallic Premium Posi Nakamoto

This part replaces:

  • Reference Number MD699
  • Reference Number 55034
  • Hollander 530-01978
  • Hollander 533-02375
  • OE # 18040482
  • OE # 19202731
  • Reference Number MD714
  • Reference Number 55051
  • Nakamoto MD699, MD714, 55034, 18040482
Part #: 1ABFS02729

Out of Stock

Nakamoto
Brand #: MD699, MD714, 55034, 18040482

How-to Video:

(10:37 min)