Brake Pad Specifications:

  • Premium Posi Semi-Metallic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Fit 5 Stud Wheels
  • Outside Diameter: 11.25 Inches
  • Fit 4WD (Four Wheel Drive) Models only
    • Do NOT fit 2WD (Two Wheel Drive) Models

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the Wheel (1:00)
    • While your car is still on the ground, use your 21mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 21mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the calipers (1:43)
    • Remove the four 13mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Use your 15mm socket and ratchet to remove your caliper brackets to access the rotors.
    • Pull off the brake rotor.
  3. step : Install new rotor and pads (4:10)
    • Clean new rotor with brake cleaner.
    • Check your caliper pins to make sure they are in good working order.
    • Put your caliper bracket back on, and tighten the 15mm bolts to 60-65 ft lbs.
    • Insert your new pads into the brackets.
    • Dab the sides where they slide into the brackets with anti-seize lubricant.
    • Loosen the cap on the brake fluid.
    • Use your C-clamp or caliper tool to compress your caliper.
    • Place your caliper onto the bracket.
    • Tighten your 13mm bolts to 25 ft lbs
    • Tighten the cap on your brake fluid.
  4. step : Put wheel back on (9:00)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 100 ft lbs.
    • Replace hubcap.
  5. step : Test and set brakes (9:05)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • Obviously this is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Hammer
  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket
  • 21mm Socket

4.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
1
0
0
Great Desl
They were an exceptional deal for price. That deal couldn't have been bettered. As for quality they seem to be ok but only time will tell. I should have the chance to write a review when they wear out to see how long they last haha. Putting them on at 160k so will see how it goes.
July 8, 2017
Purchased
9 months ago
New front rotors & pads
Perfect fit, timely delivery, but after only 3 weeks on my Ford Ranger the brakes seem to growl at intersections and at stops. Braking is fine but noisy in side-by-side traffic causing other motorists to glance over as I'm repositioning or creeping forward.
August 14, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1995-2000 Ford Explorer 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2001 Ford Explorer 4 Door 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1998-2002 Ford Ranger 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1998-2002 Mazda B2300 Truck 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1998-2002 Mazda B2500 Truck 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1998-2002 Mazda B3000 Truck 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1998-2002 Mazda B4000 Truck 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1997-2001 Mercury Mountaineer 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit Nakamoto

This part replaces:

  • Nakamoto MD652, F67Z 1125 BA
Part #: 1ABFS00004



Nakamoto
Brand #: MD652, F67Z 1125 BA

How-to Video:

(09:28 min)