Replaces

Brake Kit Nakamoto MD598, MD610, 54030, YF1Z 2C026 AA - 1ABFS01598

This brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • 8 Piece FRONT & REAR Brake Pad Set
  • Includes shims
  • Direct replacements
  • Professional Grade SEMI-METALLIC Disc Brake Pads

Brake Rotor Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Fit 5 Lug Wheels
  • Direct replacements

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Brake Pad Friction Material: Semi-Metallic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Rear Semi-Metallic Brake Pad Set
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Front Brake Rotor Specifications: 11.57" (294mm)
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 5 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:05)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 19mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 19mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the brake calipers (1:36)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 12mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 15mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Install new brake rotor and pads (4:23)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 75 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 20 ft lbs.
  4. step : Put wheel back on (6:40)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 75-100 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (7:25)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 15mm Socket
  • 19mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
brake kit for ford taurus
the product was great and fitted perfectly for the taurus. more importantly the service was professional and courteous. so then i bought the struts for our escort. i have also recommended Ai auto to my mechanic.
October 8, 2017
Purchased
10 months ago
Just as described
Easy install brakes top-notch rotors excelent. If you have a problem just watch the 1A video and you can solve it yourself
April 3, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1996-1999Ford Taurus Ford Taurus SHO Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
2001-2007Ford Taurus Ford Taurus Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
1995-2002Lincoln Continental Lincoln Continental Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
2001-2005Mercury Sable Mercury Sable Front & Rear Premium Posi Semi-Metallic Brake Kit Nakamoto

This part replaces:

  • Nakamoto MD598, MD610, 54030, YF1Z 2C026 AA
Part #: 1ABFS01598


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: MD598, MD610, 54030, YF1Z 2C026 AA

How-to Video:

(08:12 min)