Specifications:

  • 4 Piece Front or Rear (as per application) Brake Pad Set
  • Direct replacement
  • Professional Grade Semi-Metallic Disc Brake Pads

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) Front or Rear (as per application)
  • Replaces dealer part numbers: 14056179, 1613287, 19174912
  • Fit 5 Stud Wheels
  • Direct replacements

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Reassemble the bearings. (0:30)
    • Use race installation tools or a block of wood to assemble the inner bearing.
    • Pack the outer bearing with bearing grease.
    • Inspect the spindle and clean it with a paper towel.
    • Mount the rotors and insert the outer bearing.
    • thread your washer and bolt on.
    • Tighten the bolt some with your ratchet and then loosen it; this will seat the outer bearing.
    • Put the nut and dust cap on.
  2. step : Install the new brakes (5:09)
    • Clean the brake rotors with brake cleaner.
    • Clean the caliper sleeves with a wire brush.
    • Apply anti-seize grease to the edges of the brake pads where they slide into the calipers.
    • Compress your caliper pistons with a large C-Clamp
    • Put the brake pads into the caliper.
    • Mount the caliper.
    • Clean up your caliper bolts and apply a little anti-seize grease to them.
    • Torque the caliper bolts to 45 ft lbs.
  3. step : Put the wheel back on (8:53)
    • Thread the lug nuts on
    • Lower the vehicle
    • Torque the lug nuts in a star pattern to 100 ft lbs

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Block of Wood
  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket
  • 27mm socket

  • Specialty Tools

  • Race Installation Tools

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1979-1985 Buick Riviera Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1979-1985 Buick Riviera Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1979-1985 Cadillac Eldorado Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1979-1985 Cadillac Eldorado Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1980-1985 Cadillac Seville Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1980-1985 Cadillac Seville Rear Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1983-1996 Chevy Blazer S10 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1997 Chevy Blazer S10 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit for Models with Rear Drum Brakes Nakamoto
  • 1983-1997 Chevy S10 Pickup 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1983-1996 GMC Jimmy S-15 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1997 GMC Jimmy S-15 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit for Models with Rear Drum Brakes Nakamoto
  • 1983-1990 GMC S-15 Pickup 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1991-1997 GMC S-15 Sonoma 4 Wheel Drive Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1991 GMC Syclone Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1992-1993 GMC Typhoon Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1991-1994 Olds Bravada Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1996 Olds Bravada Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1979-1985 Olds Toronado Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1979-1985 Olds Toronado Rear Premium Posi Semi-Metallic Brake Kit Nakamoto

This part replaces:

  • Nakamoto MD154, 5550
Part #: 1ABFS01427


Nakamoto
Brand #: MD154, 5550

How-to Video:

(09:53 min)