This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Semi-Metallic brake pads
  • 4 Piece Brake Pad Set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part numbers: 8-19152-699-0, 8191526990, 19152699
  • Fits 5 Stud Wheels
  • Studs already installed
  • Only fits 2WD Models
  • Does not fit 4WD Models
  • Includes ABS ring (already installed)

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Reassemble the bearings. (0:30)
    • Use race installation tools or a block of wood to assemble the inner bearing.
    • Pack the outer bearing with bearing grease.
    • Inspect the spindle and clean it with a paper towel.
    • Mount the rotors and insert the outer bearing.
    • thread your washer and bolt on.
    • Tighten the bolt some with your ratchet and then loosen it; this will seat the outer bearing.
    • Put the nut and dust cap on.
  2. step : Install the new brakes (5:09)
    • Clean the brake rotors with brake cleaner.
    • Clean the caliper sleeves with a wire brush.
    • Apply anti-seize grease to the edges of the brake pads where they slide into the calipers.
    • Compress your caliper pistons with a large C-Clamp
    • Put the brake pads into the caliper.
    • Mount the caliper.
    • Clean up your caliper bolts and apply a little anti-seize grease to them.
    • Torque the caliper bolts to 45 ft lbs.
  3. step : Put the wheel back on (8:53)
    • Thread the lug nuts on
    • Lower the vehicle
    • Torque the lug nuts in a star pattern to 100 ft lbs

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Block of Wood
  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket
  • 27mm socket

  • Specialty Tools

  • Race Installation Tools

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:53 min)

Tools List:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Block of Wood
  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket
  • 27mm socket

  • Specialty Tools

  • Race Installation Tools



This part replaces:

  • Nakamoto MD154, 31254-DSZ

Vehicle Fit

  • 1991 Chevy Blazer S10 Front Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic 2 Wheel Drive with ABS Brakes Performance Nakamoto
  • 1992-1997 Chevy Blazer S10 Front Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic 2 Wheel Drive Performance Nakamoto
  • 1994-1995 Chevy S10 Pickup Front Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi 2 Wheel Drive Semi-Metallic V6 4.3L Performance Nakamoto
  • 1996-2002 Chevy S10 Pickup Front Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic 2 Wheel Drive Performance Nakamoto
  • 1991 GMC Jimmy S-15 Front Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic 2 Wheel Drive with ABS Brakes Performance Nakamoto
  • 1992-1997 GMC Jimmy S-15 Front Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic 2 Wheel Drive Performance Nakamoto
  • 1994-1995 GMC S-15 Sonoma Front Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi 2 Wheel Drive Semi-Metallic V6 4.3L Performance Nakamoto
  • 1996-2002 GMC S-15 Sonoma Front Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic 2 Wheel Drive Performance Nakamoto
  • 1996-1997 Isuzu Hombre Front Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 1998-2000 Isuzu Hombre Front Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic 2 Wheel Drive Performance Nakamoto
Only 3 left in stock
Part #: 1APBS00011

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD154, 31254-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More