Replaces

Brake Kit Nakamoto MD1084, MD898, 53005-DSZ, 53006-DSZ - 1APBS00240

This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Semi Metallic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a set of 4
    • Includes both LH (Driver) & RH (Passenger) Side FRONT & REAR
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheel
  • Front
    • 13.2" (336mm) Diameter
  • Rear
    • 13.86" Diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Pad Bonding Type: Premium Posi
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Friction Material: Semi-Metallic
  • Kit Includes: (1) Rear Semi-Metallic Brake Pad Set
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Front Brake Rotor Specifications: Vented
  • Rear Brake Rotor Specifications: 13.86" (352mm)
  • Front Brake Rotor Specifications: 13.19" (335mm)
  • Rear Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 5 Lug
  • Rear Brake Rotor Specifications: 5 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:17)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 22mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 22mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the calipers (1:50)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 13mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 13/16 inch bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Hit the rotor with a rubber mallet or hammer if necessary.
    • Take care not to damage the lug studs.
  3. step : Install new rotor and pads (6:10)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 110 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 25 ft lbs.
  4. step : Put wheel back on (10:40)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 120 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (11:00)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Large C-Clamp
  • Large Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket

  • Sockets - SAE

  • 13/16 Inch Socket
  • 7/8 Inch Socket

4.8 / 5.0
8 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
0
1
0
0
Quality parts
Easy online ordering, fast shipping and parts are as good quality as you would get from your local parts store at a LOT better price!!
May 7, 2018
Purchased
2 months ago
Parts fit correctly and good performance, great price, shipped very timely
April 30, 2018
Purchased
3 months ago
Nakamoto brake kit
ARRIVED EARLIER THAN ANTICIPATED. FIT PERFECTLY. AND STOPS THE TRUCK WITH AUTHORITY. SEEMS TO BE A GREAT PRODUCT. DEFINITELY WILL ORDER THE SAME WHEN NEEDED.
August 21, 2017
Purchased
11 months ago
Great Product, Great Price, Great how-to Videos to get the job done.
Ordered a replacement radiator, front and rear shocks and struts, and this set of breaks from 1AAuto, and a friend and I put it all in my truck with help from the videos and instructions on this website. everything went as expected other than my suspension and ball joint was a pain to get apart and slowed us down. But this probably saved me $3k over having a shop do all that work. everything seems to be great quality and is working great. Thanks 1AAuto, I can't recommend the site enough.
August 1, 2017
Purchased
1 year ago
Easy install, breaking in not too complicated
They look good on my truck, stopping is Better now, but I've noticed a rubbing noise. I repeated the break in process, and it made it a little less noticeable, but still there. I'm certain I installed correctly, so maybe it's just a matter of time of breaking them in for the sound to disappear.
March 14, 2017
Purchased
1 year ago
Quality Parts
These parts fit properly and are excellent quality. The shipping was on time and no damage. Next time I will order hardware kits and save a lot of time cleaning parts.
February 19, 2017
Purchased
1 year ago
Excellent product, delivers as advertised.
Outstanding equipment. Easy to install, and after three or four months has had no issues. Highly recommended! I love that the parts come as a set, makes things very simple.
February 17, 2017
Purchased
1 year ago
Price is right!
So far so good and the price was amazing! These made a huge difference on the truck
February 16, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 6 answers
Does this kit fit 4wd ram 1500?
Ray H on Mar 1, 2018
BEST ANSWER: This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.

Vehicle Fit

  • 2007-2009 Chrysler Aspen Front & Rear Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2007-2009 Dodge Durango Front & Rear Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2006 Dodge Ram 1500 Truck (excluding SRT-10 & Mega Cab) Front & Rear Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2007-2008 Dodge Ram 1500 Truck (excluding SRT-10 & Mega Cab) Front & Rear Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2009-2010 Dodge Ram 1500 Truck Front & Rear Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2011-2016 Ram 1500 Truck Front & Rear Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto

This part replaces:

  • Nakamoto MD1084, MD898, 53005-DSZ, 53006-DSZ
Part #: 1APBS00240

Nakamoto
Brand #: MD1084, MD898, 53005-DSZ, 53006-DSZ

How-to Video:

(11:30 min)