Brake Pad Specifications:

  • Premium Posi Semi Metallic brake pads
  • 4 Piece Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver Side) & RH (Passenger Side) Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • 10.63" Diameter Rotor

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Pad Bonding Type: Premium Posi
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Friction Material: Semi-Metallic
  • Kit Includes: (1) Rear Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Rear Brake Rotor Specifications: Solid
  • Rear Brake Rotor Specifications: 10.63" (270mm)
  • Rear Brake Rotor Specifications: 5 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:10)
    • Loosen your lug nuts with a 19 mm socket and breaker bar
    • Raise and secure the vehicle.
    • Remove the lug nuts the rest of the way and set the wheel aside.
  2. step : Inspect and remove the brakes (1:46)
    • Observe the thickness of your brake pads.
    • Inspect your rotors for excessive wear or deep gouges.
    • Loosen the caliper bolt with a 14 mm socket and ratchet.
    • Use a flat blade screwdriver to compress the caliper pistons some and remove the caliper.
    • Unbolt the 15 mm caliper bracket bolts.
    • Remove the rotor
  3. step : Install the new disc brakes (4:33)
    • Clean your new rotor with brake cleaner (mineral spirits would work just as well)
    • Install the brake rotor onto the vehicle.
    • Mount the caliper bracket and torque the 15 mm bolts to 85-90 ft lbs
    • Use a C-clamp to compress the caliper.
    • Install the brake pads, dabbing a bit of anti-seize grease on the edges to get it in.
    • Push the caliper into place and bolt it down with your 14 mm socket.
    • Torque the 14 mm bolt to 35 ft lbs.
  4. step : Mount the wheel (8:17)
    • Put the wheel on the vehicle.
    • Hand-tighten the lug nuts.
    • Lower the vehicle.
    • Torque your lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2007 Chevy Cobalt Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2008 Chevy Cobalt Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic (excluding SS Models) Performance Nakamoto
  • 2008-2010 Chevy HHR Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2004-2005 Chevy Malibu Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic for New Body Style (4th Vin Digit Z) Performance Nakamoto
  • 2006-2012 Chevy Malibu Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2004-2007 Chevy Malibu Maxx Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2007-2009 Pontiac G5 Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2005-2010 Pontiac G6 Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2005-2006 Pontiac Pursuit Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2007-2009 Saturn Aura Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto
  • 2004-2007 Saturn Ion Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Semi-Metallic Performance Nakamoto

This part replaces:

  • Reference Number MD1033
  • Nakamoto MD1033, 55094-DSZ
Only 3 left in stock
Part #: 1APBS00079

Nakamoto
Brand #: MD1033, 55094-DSZ

How-to Video:

(09:17 min)