This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 22702612, 19113681, 19175264
  • Fits 4 Stud Wheels
  • Vented
  • 10.08" (256mm) diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:05)
    • Remove the lug nut covers
    • Remove the hub cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:25)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brake Pads (2:00)
    • Use a flat blade screwdriver or pry bar to push the pistons in
    • Remove two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (3:10)
    • Remove two 15mm bolts from the brake caliper bracket using a ratchet and pipe for leverage
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (3:55)
    • Slide the rotor on
    • Put the bracket back into place
    • Start the 15mm bolts by hand
    • Tighten the bolts to 80 foot-pounds of torque
  6. step : Installing the New Brake Pads (4:37)
    • Remove the brake pad slides from the bracket
    • Clean the slides with a wire brush
    • Push the brake pad slides on
    • Attach the wear indicator to the top of the inside brake pad
    • Install the new brake pads into the bracket with the wear indicator on the upper side
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Clean the piston slides and apply bearing grease
    • Insert the piston slides
    • Thread bolts by hand
    • Tighten bolts to 20 foot--pounds
  7. step : Reattaching the Wheel (8:06)
    • Straighten out the wheel
    • Slide the wheel into place
    • Apply penetrating oil to the wheel studs
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the wheel cover
    • Reattach the lug nut covers
  8. step : Testing the Brakes (8:39)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bearing Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 19mm Socket

4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
1
0
0
0
07 Colbalt
Went on easy. Brake in period ceramics caused a bit of smoke. Great quality on pads and rotors. I will order another set for my other car.
November 4, 2017
Purchased
7 months ago
Great deal and help to the diy-er
These parts were priced at a great deal and fit just like the original. The tutorial videos are very helpful. Saved myself over $150 by doing this job myself.
April 11, 2018
Purchased
4 weeks ago
Great!
The parts arrived in good condition. They went on easily, and are of good quality. I would recommend to others.
December 14, 2017
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2006 Chevy Cobalt Front Premium Posi Ceramic Brake Kit for Models with Rear Drum Brakes Nakamoto
  • 2007-2010 Chevy Cobalt Front Premium Posi Ceramic Brake Kit for Models with Rear Drum Brakes & 4 Lug Wheels Nakamoto
  • 2007-2009 Pontiac G5 Front Premium Posi Ceramic Brake Kit for Models with Rear Drum Brakes Nakamoto
  • 2005-2006 Pontiac Pursuit Front Premium Posi Ceramic Brake Kit for Models with Rear Drum Brakes Nakamoto
  • 2003 Saturn Ion Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2004-2007 Saturn Ion Front Premium Posi Ceramic Brake Kit for Models with Rear Drum Brakes Nakamoto

This part replaces:

  • Nakamoto CD956, 55083
Part #: 1ABFS00702



Nakamoto
Brand #: CD956, 55083

How-to Video:

(09:05 min)