Replaces

Brake Kit Nakamoto CD931, CD932, 54103-DSZ, 54105-DSZ - 1APBS00540

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a set of 4
  • Includes both LH (Driver) & RH (Passenger) Side Front & Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Product Line: Performance
  • Brake Pad Features & Benefits: OE Grade Multi-Layer Shim
  • Brake Pad Features & Benefits: Positive Mold Technology
  • Brake Pad Features & Benefits: Environmentally Compliant
  • Brake Pad Features & Benefits: Thermal Scorched

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:20)
    • Loosen the lug nuts with the tire iron
    • Raise and secure the vehicle.
    • Remove the lug nuts and the wheel.
    • Set the wheel aside.
  2. step : Remove the calipers and rotors (2:05)
    • Turn the hub/rotor assembly to gain better access to the caliper bolts.
    • Use a flat blade screwdriver to compress the caliper piston.
    • Unbolt the 14 mm bolts securing the caliper.
    • Pry the caliper off and secure out of the way with a wire tie.
    • Remove the brake pads and unbolt the caliper bracket with an 18 mm socket, ratchet and breaker bar.
    • Remove the rotor, give it a few smacks with a hammer to break it loose from the hub.
  3. step : Assemble the calipers and rotors. (5:40)
    • Clean your rotor with brake cleaner or mineral spirits.
    • Clean up the caliper brackets with a wire brush and bolt onto the rotor.
    • Take your new brake pads and apply a bit of anti-seize brake grease to the edges going in the bracket.
    • Put your brake pads on.
    • Use a C-clamp and a block of wood to compress the caliper the rest of the way.
    • Check the caliper piston slides to make sure they slide freely.
    • Mount the caliper and bolt it down.
    • Torque your 14 mm caliper bolts to 30 ft lbs, and the 18 mm bracket bolts to 80 ft lbs.
  4. step : put the wheel back on (10:00)
    • Put the lug nuts back on and lower the vehicle.
    • Use a star pattern to torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Wire Ties
  • Block of Wood
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 14mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Good parts good price
All of my parts fit without any problems! Great quality, fast shipping and a good price! Thanks,
September 10, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2011Ford Crown Victoria Ford Crown Victoria Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2003-2011Mercury Grand Marquis Mercury Grand Marquis Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2003-2004Mercury Marauder Mercury Marauder Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
Part #: 1APBS00540


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD931, CD932, 54103-DSZ, 54105-DSZ

How-to Video:

(10:55 min)