Replaces

Brake Kit Nakamoto CD931, CD932, 3W1Z 1125 AA, 3W7Z 2C026 AA - 1ABFS02587

Brake Pad Specifications:

  • Ceramic Brake Pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Come as a Set of 4
  • Fits LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fits 5 lug wheels
  • Direct replacements

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:20)
    • Loosen the lug nuts with the tire iron
    • Raise and secure the vehicle.
    • Remove the lug nuts and the wheel.
    • Set the wheel aside.
  2. step : Remove the calipers and rotors (2:05)
    • Turn the hub/rotor assembly to gain better access to the caliper bolts.
    • Use a flat blade screwdriver to compress the caliper piston.
    • Unbolt the 14 mm bolts securing the caliper.
    • Pry the caliper off and secure out of the way with a wire tie.
    • Remove the brake pads and unbolt the caliper bracket with an 18 mm socket, ratchet and breaker bar.
    • Remove the rotor, give it a few smacks with a hammer to break it loose from the hub.
  3. step : Assemble the calipers and rotors. (5:40)
    • Clean your rotor with brake cleaner or mineral spirits.
    • Clean up the caliper brackets with a wire brush and bolt onto the rotor.
    • Take your new brake pads and apply a bit of anti-seize brake grease to the edges going in the bracket.
    • Put your brake pads on.
    • Use a C-clamp and a block of wood to compress the caliper the rest of the way.
    • Check the caliper piston slides to make sure they slide freely.
    • Mount the caliper and bolt it down.
    • Torque your 14 mm caliper bolts to 30 ft lbs, and the 18 mm bracket bolts to 80 ft lbs.
  4. step : put the wheel back on (10:00)
    • Put the lug nuts back on and lower the vehicle.
    • Use a star pattern to torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Wire Ties
  • Block of Wood
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 14mm Socket

4.5 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
0
1
0
0
Brake pads and rotors
Fast delivery at my door within 2 to 3 days I love the parts better than ordering from the auto store the only difference is you just have to wait till they deliver it the wait is well worth it thank you
February 1, 2017
Purchased
1 year ago
I would recommend this kit. I am extremely satisfied. Don't let the great price scare you into thinking your not getting a quality product. I have been running mine on my car for a month and they are great. Absolutely will purchase this again if needed.
July 4, 2017
Purchased
8 months ago
Great Kit!
The only thing that I needed to buy for this outside of the Kit itself was some Brake Squeal Stop prior to mounting the pads. I have put about 500 miles on these and they work as intended. These were installed on a 2011 Crown Victoria PI.
January 5, 2018
Purchased
2 months ago
Coils
The brakes and spark plugs are great ! The coils on the other hand are causing my car to sputter at idle because it's not giving the proper voltage. I do not recommend anyone buying those cheap coils for your spark plugs.
July 2, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(10:55 min)

Tools List:

    General Tools

  • Wire Brush
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Wire Ties
  • Block of Wood
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 14mm Socket



This part replaces:

  • Reference Number CD931
  • Reference Number CD932
  • OE # 3W7Z 2C026 AA
  • OE # 3W1Z 1125 AA
  • Nakamoto CD931, CD932, 3W1Z 1125 AA, 3W7Z 2C026 AA

Vehicle Fit

  • 2003-2011 Ford Crown Victoria Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2003-2011 Mercury Grand Marquis Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2003-2004 Mercury Marauder Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
Part #: 1ABFS02587

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD931, CD932, 3W1Z 1125 AA, 3W7Z 2C026 AA

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More