Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Rotor Coating: Zinc Coated
  • Kit Includes:
    (1) Front Ceramic Brake Pad Set
    (2) Front Performance Brake Rotors
  • Product Line: Performance
  • Brake Pad Features & Benefits:
    OE Grade Multi-Layer Shim
    Positive Mold Technology
    Environmentally Compliant
    Thermal Scorched

Brake Pad Specifications:

  • Professional grade Ceramic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched Pair
  • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • Direct replacements
  • Built to strict quality control standards

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:20)
    • Loosen the lug nuts with the tire iron
    • Raise and secure the vehicle.
    • Remove the lug nuts and the wheel.
    • Set the wheel aside.
  2. step : Remove the calipers and rotors (2:05)
    • Turn the hub/rotor assembly to gain better access to the caliper bolts.
    • Use a flat blade screwdriver to compress the caliper piston.
    • Unbolt the 14 mm bolts securing the caliper.
    • Pry the caliper off and secure out of the way with a wire tie.
    • Remove the brake pads and unbolt the caliper bracket with an 18 mm socket, ratchet and breaker bar.
    • Remove the rotor, give it a few smacks with a hammer to break it loose from the hub.
  3. step : Assemble the calipers and rotors. (5:40)
    • Clean your rotor with brake cleaner or mineral spirits.
    • Clean up the caliper brackets with a wire brush and bolt onto the rotor.
    • Take your new brake pads and apply a bit of anti-seize brake grease to the edges going in the bracket.
    • Put your brake pads on.
    • Use a C-clamp and a block of wood to compress the caliper the rest of the way.
    • Check the caliper piston slides to make sure they slide freely.
    • Mount the caliper and bolt it down.
    • Torque your 14 mm caliper bolts to 30 ft lbs, and the 18 mm bracket bolts to 80 ft lbs.
  4. step : put the wheel back on (10:00)
    • Put the lug nuts back on and lower the vehicle.
    • Use a star pattern to torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Wire Ties
  • Block of Wood
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2003-2011Ford Crown Victoria Ford Crown Victoria Front Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2003-2011Lincoln Town Car Lincoln Town Car Front Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2003-2011Mercury Grand Marquis Mercury Grand Marquis Front Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2003-2004Mercury Marauder Mercury Marauder Front Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD931, 54103-DSZ
  • Reference Number CD931
Part #: 1APBS00794


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD931, 54103-DSZ

How-to Video:

(10:55 min)