Brake Pad Specifications:

  • Premium Posi Ceramic Enhanced Disc Brake Pads
  • 4 Piece Rear brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a Pair
  • Fits LH (Driver Side) & RH (Passenger Side) Rear
  • Direct replacements
  • Fits 5 lug wheels

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:50)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brakes (1:29)
    • Loosen the two 14mm guide pin bolts from the caliper
    • Remove the two 14mm guide pin bolts from the caliper
    • If the bolts are stuck, wedge the bolt out with a few wrenches
    • Pull off the brake caliper
    • Hang the caliper aside with a bungee cord
    • Remove the two 17mm bolts from the caliper bracket
    • Pull off the caliper bracket
    • Slide off the brake rotor
    • Remove the brake pads from the caliper bracket
  3. step : Preparing the Brakes (4:24)
    • Pry the shims off the caliper bracket with a flat blade screwdriver
    • Clean the caliper bracket with a wire brush
    • Clean the brake shims with a wire brush
    • Apply brake grease to the shim mounting area on the caliper bracket
    • Clip the shims onto the caliper bracket
    • Pull out the caliper slide pins
    • Clean any old grease or debris off the pins with a paper towel
    • Apply brake grease to the pins
    • Slide the pins into the bracket
    • Clean the hub surface with a wire brush
    • Use a power sander if necessary
    • Apply brake grease to the hub surface
  4. step : Installing the Brakes (6:42)
    • Slide the rotor onto the hub backwards
    • Spray the back of the rotor with brake parts cleaner
    • Slide off the rotor
    • Slide the rotor onto the hub normally
    • Spray the front of the rotor with brake parts cleaner
    • Put the caliper bracket into place
    • Install the two 17mm bolts into the caliper bracket
    • Put the brake pads into the caliper bracket
    • Apply brake grease to the back of the pads
    • Compress the brake caliper piston with pliers
    • Remove the bungee cord
    • Place the caliper onto the bracket
    • Fasten the 14mm bolts into the caliper
  5. step : Installing the Wheel (8:29)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds of torque in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket
  • 14mm Socket

3.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
1
Exactly what I need.
This kit was exactly what I needed and fit perfectly.
January 11, 2018
Purchased
1 month ago
Sent me the brakes for the rear
Sent me the wrong set of brakes, they are for the rear not the front as I had ordered
November 18, 2017
Purchased
3 months ago
Response from 1A Auto
Hello, Juan! We are sorry to hear the parts you got were not correct, and would advise you to contact our customer service department for further assistance. 888-844-3393
November 20, 2017
Tim KStaff
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:10 min)

Tools List:

    General Tools

  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket
  • 14mm Socket



This part replaces:

  • OE # 432068H701
  • OE # 432068H702
  • Nakamoto CD905, 31349

Vehicle Fit

  • 2003-2004 Infiniti G35 Rear Brake Kit Premium Posi Ceramic without Brembo Calipers Nakamoto
  • 2005 Infiniti G35 X Premium Posi Brake Kit Ceramic Nakamoto
  • 2003-2005 Nissan 350Z Rear Brake Kit Premium Posi Ceramic without Brembo Calipers Nakamoto
  • 2011-2013 Nissan Leaf Rear Brake Kit Premium Posi Ceramic Nakamoto
  • 2008-2017 Nissan Rogue Rear Brake Kit Premium Posi Ceramic Nakamoto
  • 2014-2015 Nissan Rogue Select Rear Brake Kit Premium Posi Ceramic Nakamoto
Part #: 1ABFS00467

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD905, 31349

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More