Brake Kit Nakamoto CD882, CD883, 55073, 55069 - 1ABFS01636

This brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic Enhanced Disc Brake Pads
  • 8 Piece FRONT & REAR Brake Pad Set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Replaces dealer part numbers: 81515-89750, 177882, 15134671, 15158975, 19181002, 8151589750
  • Fit 6 Stud Wheels
  • FRONT - 11.9" Diameter Vented Rotors
  • REAR - 12.8" Diameter Vented Rotors

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.


Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:24)
    • Remove the center cap with a screwdriver
    • Take the plastic lug covers off.
    • With a 19 mm socket and ratchet or lug wrench, loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts.
    • Remove the wheel and set aside.
  2. step : Remove the brakes (1:39)
    • Use a 13 mm socket to remove the calipers.
    • Pry up the brake pads with your flat blade screwdriver.
    • Check the life of your rotors by checking for grooves and wear.
    • Use your 18 mm socket and ratchet to remove the caliper brackets.
    • Remove the rotors if needed.
  3. step : Install the new brakes (4:32)
    • Clean your rotors with brake parts cleaner and put them on the hub.
    • Apply anti-seize grease to the edges of the brake pads where they slide into the calipers.
    • Compress your caliper pistons with a large C-Clamp
    • Clean up your caliper bolts and apply a little anti-seize grease to them.
    • Put your caliper brackets back on.
    • Put the brake pads into the caliper brackets and then the caliper.
    • Put the caliper bolts into your brackets, with the one with the bushing on the bottom.
    • Torque the caliper bracket bolts to 90 ft lbs, and the caliper bolts to 25.
  4. step : Put the wheel back on. (8:53)
    • Put the wheel back on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100-120 ft lbs.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Wire Brush
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 13mm Wrench
  • 19mm Wrench
  • 18mm Wrench

5.0 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
The right parts with fast and free delivery
Excellent parts request verification system. Very impressive service with quality and a fair prices being at the forefront.
February 23, 2018
1 year ago
Very satisfied!
I ordered these brakes and rotors for a 2002 Chevy Trailblazer and they arrived without issue! Everything works perfectly and the .installation video was really helped!
January 25, 2018
5 months ago
best price fast delivery
very pleased with the brake kit the service and the price saved me a lot of dollars thks!
October 26, 2017
8 months ago
Excellent all around
Found 1A Auto to have excellent pricing, excellent delivery service and once the brake kit arrived, matched up and installed beautifully! Never ordered a kit like this online before so I was a little skeptical. I will order from 1A Auto again! Only minor disappointment was no pad hardware included with the pads.
August 15, 2017
10 months ago
Good Product
Good Product. I have had it installed and it is working well. Good product for the price.
July 30, 2017
12 months ago
Product Review
Great product, easy install thanks to videos. Wiah i could work for company. Great line products. Thanks again
July 7, 2017
1 year ago
Good buy
Items came within a week with the free shipping and the parts work perfectly. Awesome buy
June 22, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 5 answers
I ordered breaks and rotors a year ago and there is one in the rear grinding already, is this normal?
Kelly R on Jul 25, 2016
BEST ANSWER: If 1 brake is grinding, its normally due to a sticking caliper or pads that are sticking in the slides.

Vehicle Fit

  • 2004-2005 Buick Rainier 5 Passenger Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2002-2005 Chevy Trailblazer Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2002-2004 GMC Envoy Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2005 GMC Envoy L6 4.2L Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2003-2005 Isuzu Ascender L6 4.2L Front & Rear Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD882, CD883, 55073, 55069
Part #: 1ABFS01636

Brand #: CD882, CD883, 55073, 55069

How-to Video:

(09:57 min)