Replaces

Brake Kit Nakamoto CD882, CD883, 55069-DSZ, 55073-DSZ - 1APBS00330

This performance brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a set of 4
    • Includes both LH (Driver) & RH (Passenger) Side FRONT & REAR
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 6 Stud Wheels
  • Front
    • Vented
    • 11.9" Diameter
    • Correct for models with 113" wheel base (5 passenger)
  • Rear
    • 12.8" (325 mm) Diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Rear Brake Rotor Specifications: 12.80" (325mm)
  • Front Brake Rotor Specifications: Vented
  • Rear Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 6 Lug
  • Front Brake Rotor Specifications: 11.90" (302mm)
  • Rear Brake Rotor Specifications: 6 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove wheel. (1:15)
    • Remove hub cap or center cap if you have it.
    • While your car is still on the ground, use your 19mm socket to loosen your lug nuts.
    • Jack up and secure your car with jack stands.
    • Remove the lug nuts with your 19mm socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the rear brake calipers (1:46)
    • Use a screwdriver to force the pistons back in.
    • Remove the two 14mm bolts to remove the calipers.
    • Use a wire tie to fasten the caliper out of the way.
    • Use your screwdriver to pry out your brake pads.
    • Remove the two 18mm bolts on the caliper bracket to remove it.
    • Remove the caliper bolt sleeves.
    • Check their condition and clean them with a wire brush if necessary.
    • Pull off the brake rotor.
    • Screw in the two 10M bolts to remove the rotor.
    • Take care not to damage the lug studs.
  3. step : Install new rear brake rotor and pads (6:30)
    • Clean new rotor with brake cleaner.
    • Insert your new pads into the brackets.
    • Put your caliper bracket back on, and tighten the bolts to 90-100 ft lbs.
    • Compress the caliper piston with a c-clamp to reset the pistons.
    • Mount the caliper on the bracket and torque the bolts in to 15-20 ft lbs.
  4. step : Put the rear wheel back on (10:25)
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten to 100 ft lbs.
    • Replace hubcap/center cap.
  5. step : Test and set brakes (11:00)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place.
    • Test the brakes in your driveway before taking the car onto the road.
    • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph.
    • This is best done on a straight back road without any traffic.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Large Hammer
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • M10 x 7cm bolts
  • Wire Ties

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 14mm Socket
  • 18mm Socket
  • 19mm Socket

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Feedback
A good quality product at a fair price I got the rite size parts the first time I would recommend this product to anyone
July 13, 2018
Purchased
2 months ago
Good job
The rotor and pads I purchased fit exactly right. I am please with the products received.
June 11, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Will these fit my 05 trailblazer 4 wheel drive?
Mike H on Feb 3, 2018
BEST ANSWER: Yes, according to the information you supplied, the part you're looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
Will these fit my 2007 trailblazer ss ?
Chad T on Nov 13, 2017
BEST ANSWER: Thank you for your question, but no these will not fit your 2007 Trailblazer SS model.

Vehicle Fit

Year Make Model Description
2004-2005Buick Rainier Buick Rainier L6 4.2L Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2002-2005Chevy Trailblazer Chevy Trailblazer Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2002-2004GMC Envoy GMC Envoy Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2005GMC Envoy GMC Envoy L6 4.2L Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2003-2005Isuzu Ascender Isuzu Ascender L6 4.2L Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2002-2004Oldsmobile Bravada Olds Bravada Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD882, CD883, 55069-DSZ, 55073-DSZ
Part #: 1APBS00330

Out of Stock

Nakamoto
Brand #: CD882, CD883, 55069-DSZ, 55073-DSZ

How-to Video:

(11:30 min)