This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 15054096, 18060665, 8180606650, 81806 06650, 18060665
  • Fits 6 Stud Wheels
  • Vented
  • 12.8" diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Front Brake Rotor Specifications: 12.80" (325mm)
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 6 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:42)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:03)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brake Pads (1:45)
    • Remove the two 17mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  4. step : Removing the Brake Rotor (2:39)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread one lug nut and strike rotor with a hammer
    • Alternatively, use an M12 bolt to push the rotor off
  5. step : Installing the New Brake Rotor (4:19)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Check that the caliper bracket slides move smoothly
    • Apply grease to the slides if necessary
    • Put the bracket back into place
    • Start the 18mm bolts by hand
    • Tighten the 18mm bolts to 110 foot-pounds of torque
  6. step : Installing the New Brake Pads (5:23)
    • Clean the brake pad slides with a wire brush
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Remove the clips from the old brake pads
    • Install the clips onto the new brake pads
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the 17mm bolts by hand
    • Tighten the 17mm bolts to 40 foot-pounds
  7. step : Reattaching the Wheel (8:08)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (8:38)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Mineral Spirits
  • White Grease

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
This is a great break kit
I installed this kit on my 2004 Chevy Trailblazer Ext and so far so good. There’s no squeaks or squeals when stopping like other break kits in this price range.
January 14, 2018
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2005 Buick Rainier 7 Passenger Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2003-2005 Chevy SSR Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2002-2005 Chevy Trailblazer EXT Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2005 GMC Envoy V8 5.3L Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2002-2005 GMC Envoy XL Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2004-2005 GMC Envoy XUV Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2003-2006 Isuzu Ascender V8 5.3L Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2005 Saab 9-7X Front Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD882, 55079
Part #: 1ABFS00685

Nakamoto
Brand #: CD882, 55079

How-to Video:

(09:08 min)