Replaces

Brake Kit Nakamoto CD841, CD759, 5273141AB-DSZ, 53008-DSZ - 1APBS00799

Brake Pad Specifications:

  • Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a set of 4
    • Includes both LH (Driver) & RH (Passenger) Side Front & Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Lug Wheel
  • 11.00" (280mm) diameter vented front
  • 10.62" (270mm) diameter solid rear

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

Zinc Coated

Zinc Coated to help reduce rust and corrosion for a longer-lasting and better looking rotor

"True" Non-Interference Vane Design

"True" Non-Interference Vane Design retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots are machined to remove brake dust and expel gasses during hard braking

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:30)
    • Loosen the lug nuts
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside
  2. step : Remove the calipers and rotor (2:10)
    • Unbolt the 12 mm bolts to remove the calipers.
    • Remove the brake pads.
    • Use a breaker bar to unbolt the 18 mm caliper bracket bolts.
    • Remove the rotor.
    • A few smacks with a hammer may be needed to get the rotor off.
  3. step : Install the calipers and new rotors. (4:30)
    • Clean the hub with a wire brush and apply anti seize grease.
    • Install a new rotor after cleaning it with brake parts cleaner.
    • Clean the caliper bracket with a wire brush.
    • Check the caliper bracket pistons and put new brake pads into the brackets.
    • Put the caliper on and torque the bolts to 20 foot pounds
    • Torque the caliper bolts to 85 ft lbs.

Tools needed for replacement:

    General Tools

  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 12mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 12mm Wrench
  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2003-2006 Chrysler PT Cruiser L4 2.4L Turbo Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
  • 2003-2005 Dodge Neon SRT-4 L4 2.4L Turbo Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto

This part replaces:

  • Reference Number CD782
  • Reference Number CD841
  • Reference Number CD658
  • Reference Number CD759
  • Nakamoto CD841, CD759, 5273141AB-DSZ, 53008-DSZ
Part #: 1APBS00799



Nakamoto
Brand #: CD841, CD759, 5273141AB-DSZ, 53008-DSZ

How-to Video:

(10:25 min)