Replaces

Brake Kit Nakamoto CD729, CD726, 18060691, 55038 - 1ABFS01284

This brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • Direct replacements
  • Replaces dealer part numbers: 18060691, 15733699, 18060219
  • Fits 5 lug wheels
  • 10.76" (275mm) diameter

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 4 Piece REAR brake pad set
  • Direct replacement

Brake Rotor Specifications:

  • Come as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 15704667, 177843
  • Fits 5 lug wheels
  • 11.6" (295mm) diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:09)
    • Loosen the lug nuts with your 19 mm socket and breaker bar.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the caliper, pads and rotors (1:26)
    • Observe your brake pads and rotors; check the wear indicator on the pads and look for deep gouges or excessive wear on the rotors.
    • Unbolt the 18 mm caliper bolts.
    • Use a large flat blade screwdriver to compress the caliper piston to pull the caliper off the rotor.
    • Remove the brake pads.
    • Take your 19 mm socket and breaker bar to unbolt the caliper bracket bolts.
    • Remove and discard your old rotor.
  3. step : Replace your pads and rotors (5:11)
    • Clean your rotor with brake parts cleaner and place it on the hub.
    • Bolt down the caliper bracket with your 19 mm socket and ratchet.
    • Torque the 19 mm bolts to 100 ft lbs.
    • Dab a bit of anti-seize grease to the edges of the brake pads and place them into the caliper brackets against the rotors.
    • Compress your brake caliper piston with a large c-clamp.
    • Mount the brake caliper onto the caliper bracket.
    • Bolt the caliper down with an 18 mm socket and ratchet.
    • Torque the 18 mm bolts to 55 ft lbs.
  4. step : Replace the wheel (8:46)
    • Put the wheel back on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs in a star pattern.
    • Pump the brakes a few times and do a few 5-10 mph stops in the driveway before test driving the vehicle.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Wi these rotors work on a zr2?
Matt R on Jan 4, 2017
BEST ANSWER: This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.

Vehicle Fit

  • 1997 Chevy Blazer S10 4 Wheel Drive Front & Rear Ceramic Premium Posi Brake Kit for Models with 4 Wheel Disc Brakes Nakamoto
  • 1998-2005 Chevy Blazer S10 4 Wheel Drive Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 1999-2004 Chevy S10 Pickup 4 Wheel Drive Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 1998-2000 GMC Envoy 4 Wheel Drive Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 1997 GMC Jimmy S-15 4 Wheel Drive Front & Rear Ceramic Premium Posi Brake Kit for Models with 4 Wheel Disc Brakes Nakamoto
  • 1998-2001 GMC Jimmy S-15 4 Wheel Drive Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 1998-2004 GMC S-15 Sonoma 4 Wheel Drive Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 1997-2001 Olds Bravada Front & Rear Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD729, CD726, 18060691, 55038
Part #: 1ABFS01284


Nakamoto
Brand #: CD729, CD726, 18060691, 55038

How-to Video:

(09:35 min)