Replaces

Brake Kit Nakamoto CD702, CD711, 54090-DSZ, 54080-DSZ - 1APBS00983

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Front Brake Rotor Specifications:
      Vented
      12.13" (308mm)
      5 Lug
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Zinc Coated
  • Kit Includes:
      (1) Front Ceramic Brake Pad Set
      (1) Rear Ceramic Brake Pad Set
      (2) Front Performance Brake Rotors
      (2) Rear Performance Brake Rotors
  • Rear Brake Rotor Specifications:
      13.15" (334mm)
      Solid
      5 Lug
  • Product Line:   Performance
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

Brake Pad Specifications:

  • Premium Posi Ceramic Enhanced Disc Brake Pads
  • 8 Piece front & rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Come as a set of 4
  • Fits both LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fits 5 Stud Wheels
  • 12.13" (308mm) diameter front vented
  • 13.15" (334mm) diameter rear solid

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:25)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:06)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the 10mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Removing the Brake Drum (2:29)
    • Tighten a lug nut to the hub
    • Tap the drum to loosen it
    • Remove the lug nut
    • Pull the drum off
  4. step : Installing the New Brake Drum (3:57)
    • Slide the drum on
    • Thread on one lug nut to hold the drum in place
    • Adjust the emergency brake, if necessary
    • Clean the drum with brake parts cleaner or mineral spirits
  5. step : Installing the New Brake Pads (4:57)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply grease to the back of the pads and their contact point on the cast iron
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Tighten the caliper bolts
    • Remove the lug nut from the hub
  6. step : Reattaching the Wheel (7:25)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer

  • Materials, Fluids, and Supplies

  • Bungee Cord
  • Anti-Seize Grease
  • Mineral Spirits

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Bought this brake & rotor kit for 1 vechile and plan on ordering a set for my husbands pick up truck. Very fast shipping and excellent service.
April 5, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2002Ford Expedition Ford Expedition 4 Wheel Drive Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
1998-2002Lincoln Navigator Lincoln Navigator 4 Wheel Drive Front & Rear Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
Part #: 1APBS00983


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD702, CD711, 54090-DSZ, 54080-DSZ

How-to Video:

(08:14 min)