Replaces

Brake Kit Nakamoto CD698, 55125-DSZ - 1APBS00080

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Ceramic
  • Brake Rotor Type:   Cross Drilled & Slotted
  • Brake Rotor Coating:   Zinc Coated
  • Kit Includes:
      (1) Rear Ceramic Brake Pad Set
      (2) Rear Performance Brake Rotors
  • Rear Brake Rotor Specifications:
      10.94" (278mm)
      Solid
      5 Lug
  • Product Line:   Performance
  • Brake Pad Features & Benefits:
      OE Grade Multi-Layer Shim
      Positive Mold Technology
      Environmentally Compliant
      Thermal Scorched

This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 4 Piece Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side REAR
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Stud Wheels
  • Direct replacement
  • Built to strict quality control standards

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:41)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:08)
    • Remove top 14mm bolt from the brake caliper and loosen the bottom bolt
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Installing the New Brake Pads (1:59)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Clean the slides with a wire brush
    • Apply brake grease to the brake pads
    • Install the new brake pads into the bracket
    • Hammer the caliper on
    • Tighten the 14mm bolts to the caliper
  4. step : Reattaching the Wheel (3:32)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket
  5. step : Testing the Brakes (4:18)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer
  • Wire Brush
  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2009Buick LaCrosse Buick LaCrosse Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic V8 5.3L for Models with RPO Code FE4 (Special Ride & Handling Suspension) Performance Nakamoto
2006-2009Chevy Impala Chevy Impala Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic Performance Nakamoto
2010Chevy Impala Chevy Impala Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic for Models without Integrated Parking Brake Performance Nakamoto
2006-2007Chevy Monte Carlo Chevy Monte Carlo Rear Cross Drilled & Slotted Zinc Coated Brake Kit Premium Posi Ceramic Performance Nakamoto
Part #: 1APBS00080


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD698, 55125-DSZ

How-to Video:

(04:48 min)