Specifications:

  • 5 lug
  • 10.8" (275mm) diameter rotor

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Premium Electrostatic Coated Brake Rotor Features and Benefits:

  • Electrostatically applied finish on both sides of the rotor hat and rotor edge for long lasting corrosion protection.
  • Uniform coating without any overspray.
  • Enhanced appearance.
  • Designed to withstand 400 hours of saltwater exposure without rusting.
  • Mill balanced and double-disc ground friction surface provides smooth braking and longer pad life.
  • Positive Mold Technology

    Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

    OE Grade Multi-Layer Shim

    Reduces noise and vibration

    Environmentally Compliant

    Meets the Better Brake Law standards

    Thermal Scorched

    Accelerates the break-in process and enhances stopping performance from the first stop.

    100% CNC-Machined to Exact OE Specs

    Balanced to reduce vibration.

    Cast from OE Grade Alloy

    Manufactured from OE Grade G3000 Casting Alloy.

    Non-Directional Surface Finish

    Helps ensure smoother, quieter, and more effective braking.

    Part Details

    • Brake Pad Bonding Type: Premium Posi
    • Brake Rotor Coating: Premium E-Coated
    • Brake Pad Friction Material: Ceramic
    • Kit Includes: (1) Front Ceramic Brake Pad Set
    • Kit Includes: (2) Front E-Coated Brake Rotors
    • Front Brake Rotor Specifications: Vented
    • Front Brake Rotor Specifications: 10.83" (275mm)
    • Front Brake Rotor Specifications: 5 Lug

    Lifetime Warranty

    This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

    Wear and Tear

    This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

    1. step : Removing the Wheel (1:00)
      • Remove hub cap
      • While your car is still on the ground, use your 21mm socket to loosen your lug nuts
      • Jack up and secure your car with jack stands
      • Remove the lug nuts with your 21mm socket and ratchet
      • Remove the wheel and set aside
    2. step : Removing the Calipers (1:30)
      • Remove the 14mm bolts to remove the calipers
      • Use a wire tie to fasten the caliper out of the way
      • Use your screwdriver to pry out your brake pads
      • Use your 17mm socket and ratchet to remove your caliper brackets to access the rotors
      • Pull off the brake rotor
    3. step : Installing the New Rotor and Pads (3:57)
      • Clean new rotor with brake cleaner
      • Check your caliper pins to make sure they are in good working order
      • Put your caliper bracket back on, and tighten the 17mm bolts to 80 ft lbs
      • Insert your new pads into the brackets
      • Use your C-clamp or caliper tool to compress your caliper
      • Place your caliper onto the bracket
      • Tighten your 14mm bolts to 25 ft lbs
    4. step : Reinstalling the Wheel (8:10)
      • Make sure to use a star pattern when putting your wheel lugs back on
      • Tighten to 100 ft lbs
      • Replace hubcap
    5. step : Test and Set Brakes (7:46)
      • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place
      • Test the brakes in your driveway before taking the car onto the road
      • Set your rotors by evenly braking from 30mph to 10mph, 50mph-30mph and finally 70mph to 40mph
      • Obviously this is best done on a straight back road without any traffic

    Tools needed for replacement:

      General Tools

    • Floor Jack
    • Jack Stands
    • Large C-Clamp

    • Materials, Fluids, and Supplies

    • Wire Ties

    • Pliers, Cutters & misc Wrenches

    • Lug Wrench

    • Ratchets & Related

    • Ratchet

    • Screwdrivers & Related

    • Flat Blade Screwdriver

    • Sockets - Metric

    • 14mm Socket
    • 17mm Socket
    • 21mm Socket

    There are no reviews for this item. Write Review
    Start typing your question and we'll check if it was already asked and answered. Learn More
    No questions have been asked about this item. Be the first!

    Vehicle Fit

    • 1992-1996 Lexus ES300 Front Premium Posi Ceramic Brake Kit Premium E-Coated Nakamoto
    • 1995-1997 Toyota Avalon Front Premium Posi Ceramic Brake Kit Premium E-Coated Nakamoto
    • 1992-1996 Toyota Camry Front Brake Kit Ceramic Premium E-Coated Premium Posi V6 3.0L Nakamoto
    • 1999-2001 Toyota Camry Front Brake Kit Ceramic Premium E-Coated Premium Posi L4 2.2L & 15 Inch Wheels Nakamoto
    • 1998-2003 Toyota Sienna Front Premium Posi Ceramic Brake Kit Premium E-Coated Nakamoto

    This part replaces:

    • OE # 4351233090
    • OE # 4351233080
    • OE # 4351233060
    • OE # 4351233043
    • OE # 4351233041
    • OE # 4351233040
    • OE # 4351208021
    • OE # 4351208020
    • OE # 4351207020
    • OE # 4351206040
    • OE # 4351206031
    • OE # 4351206030
    • OE # 4351206020
    • Nakamoto CD697, 31050-E
    Part #: 1ABFS01723

    Nakamoto
    Brand #: CD697, 31050-E

    How-to Video:

    (09:00 min)