Brake Pad Specifications:

  • Professional Grade Ceramic Disc Brake Pads
  • 4 Piece FRONT Brake Pad Set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched Pair
  • Includes both LH (Driver) & RH (Passenger) Side Front
  • Cross drilled, Slotted, And Zinc Coated
  • Direct replacement
  • 10 1/2 Inch Diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:25)
    • Remove the lug nut covers and center cap.
    • Loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
    • Placing the wheel under a lift point on the vehicle will add extra security in the event of a floor jack failure.
  2. step : Remove the calipers (1:57)
    • Observe your brakes; look for excessive wear or gouges in the rotor and check the thickness of the brake pads.
    • Use a flat blade screwdriver to pry in between the caliper to compress the piston to help get the caliper off.
    • Take a 3/8 Allen wrench and place it in the caliper bolt.
    • Use an open wrench to loosen up the bolt (which you are holding in place with the Allen wrench to get it loose)
    • Remove the caliper and discard the pads.
  3. step : Remove the rotor (4:59)
    • Use a hammer and chisel to remove the dust cap.
    • Take your pliers and remove the cotter pin.
    • With a 27 mm socket and ratchet, remove the nut on the center of the rotor.
    • Remove the washer and pull the rotor off.
  4. step : install the new rotor (6:25)
    • Clean the rotor with brake clean.
    • Coat the inside of the hub with bearing grease.
    • Insert the race with the race installation tool.
    • Apply bearing grease to the bearings.
    • Insert the inner bearings to the inside of the hub and then install the seal with your race installation tools.
    • Flip the rotor and repeat the process.
    • Continue to Part 2.

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Adjustable Wrench
  • Lug Wrench

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket
  • 27mm socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Decent prices timely delivery will not be my last purchase.. Great customer service thanks..
January 26, 2018
Purchased
1 month ago
Great quality for the price!
Had pads and rotors on my 86 z28 for a week now. No complaints so far. There is no noise, no heat marks or anything unusual. AND it comes with new studs. Great quality for the price.. will be buying from 1AAuto again ??
November 7, 2017
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
do they come with hardware and bearings?
eric R on Oct 10, 2016
BEST ANSWER: These will come exactly as the originals. This will come with the studs, but not the hardware to install.

How-to Video:

(09:26 min)

Tools List:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Bearing Grease

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Adjustable Wrench
  • Lug Wrench

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket
  • 27mm socket



This part replaces:

  • Nakamoto CD154, 5547-DSZ

Vehicle Fit

  • 1982-1987 Buick Regal Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1983-1990 Chevy Blazer S10 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1991 Chevy Blazer S10 Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit without ABS Brakes Performance Nakamoto
  • 1982-1984 Chevy Camaro Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1985-1992 Chevy Camaro Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit for Models with Single Piston Calipers 10.5" (267mm) Diameter Rotors Performance Nakamoto
  • 1988 Chevy Camaro Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit 10.5" (267mm) Diameter Rotors excluding Z28 Models Performance Nakamoto
  • 1982-1987 Chevy El Camino Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1982-1983 Chevy Malibu Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1982-1988 Chevy Monte Carlo Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1982-1993 Chevy S10 Pickup 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1994-1995 Chevy S10 Pickup L4 2.2L 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1982-1987 GMC Caballero Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1983-1990 GMC Jimmy S-15 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1991 GMC Jimmy S-15 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit without ABS Brakes Performance Nakamoto
  • 1982-1990 GMC S-15 Pickup 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1991-1993 GMC S-15 Sonoma 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1994-1995 GMC S-15 Sonoma L4 2.2L 2 Wheel Drive Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1982-1987 Olds Cutlass Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1982-1984 Pontiac Firebird Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 1985-1992 Pontiac Firebird Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit for Models with Single Piston Calipers 10.5" (267mm) Diameter Rotors Performance Nakamoto
  • 1982-1987 Pontiac Grand Prix Front Cross Drilled & Slotted Zinc Coated Brake Kit Ceramic Premium Posi Performance Nakamoto
Part #: 1APBS00613

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD154, 5547-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More