Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Brake Pad Friction Material: Ceramic
  • Kit Includes:
    (1) Front Ceramic Brake Pad Set
    (1) Rear Ceramic Brake Pad Set
  • Brake Pad Features & Benefits:
    OE Grade Multi-Layer Shim
    Positive Mold Technology
    Environmentally Compliant
    Thermal Scorched

Specifications:

  • Premium Posi Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:31)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:18)
    • Remove 14mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Secure the caliper with a bungee cord
    • Remove the clips from the brake pads
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Removing the Brake Rotor (3:25)
    • Remove 19mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the Phillips screw from the rotor
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Preparing the New Brake Pads and Rotors (7:01)
    • Clean off the hub rust with an abrasive pad
    • Spray brake cleaner on the hub
    • Apply brake grease to the hub
    • Slide the rotor on
    • Clean the rotor with brake parts cleaner
    • Tighten the Phillips screw to the rotor
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Clean the caliper with a wire brush
    • Apply grease to the brake pad tabs
  5. step : Installing the New Brake Pads (9:57)
    • Put the bracket back into place
    • Start the 19mm bolts by hand
    • Press the old metal plate protector to the new pads
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the clips in and hold the brake pads
    • Put the caliper on
  6. step : Reattaching the Wheel (13:39)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 94 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bungee Cord
  • Anti-Seize Grease
  • M8 Bolt
  • Cloth Rags

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 19mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Perfect Fit for Acura MDX
These parts are an excellent fit for Acura MDX. I did the pad change and the results are excellent. Will buy again. Affordable and reliable.
July 4, 2018
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2007-2013Acura MDX Acura MDX Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
2010-2013Acura ZDX Acura ZDX Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
2009-2015Honda Pilot Honda Pilot Front & Rear Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD1378, CD1281
Part #: 1ABFS02981


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD1378, CD1281

How-to Video:

(14:46 min)