Replaces

Brake Kit Nakamoto CD1378, CD1281, 42510-STX-A00, 31468 - 1ABFS02888

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a Set of 4
    • Includes both LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fits 5 Lug Wheel
  • 12.98" (330mm) diameter vented front
  • 13.14" (334mm) diameter solid rear

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Specifications: Solid
  • Front Brake Rotor Specifications: Vented
  • Rear Brake Rotor Specifications: 13.15" (334mm)
  • Front Brake Rotor Specifications: 5 Lug
  • Front Brake Rotor Specifications: 12.99" (330mm)
  • Rear Brake Rotor Specifications: 5 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:30)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:17)
    • Remove the 12mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside and hang it with a bungee cord
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Removing the Brake Rotor (2:42)
    • Remove the 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Clean the dirt and debris from the caliper bracket with a wire brush
    • Remove the Phillips screws from the rotor
    • Tighten M8 x 1.25 bolts into the rotor to remove it
    • Pull the rotor off
    • Pry out the rubber plug if needed and adjust the parking brake adjustor with a flat blade screwdriver
  4. step : Installing the New Brake Rotor (7:35)
    • Slide the rotor on and line it up with the appropriate holes in place
    • Adjust the parking brake adjuster if needed
    • Tighten the Phillips screws into the rotor
    • Press on the rubber cap
    • Clean both sides of the rotor with brake parts cleaner
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Put the bracket back into place
    • Tighten the 17mm bolts
  5. step : Installing the New Brake Pads (12:15)
    • Apply grease to the brake pad tabs
    • Push the slides on with a flat blade screwdriver
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Tighten the 12mm bolts
  6. step : Reattaching the Wheel (15:14)
    • Slide the wheel into place
    • Start the 22mm lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 94 foot-pounds in a crossing or star pattern
  7. step : Testing the Brakes (14:07)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Bungee Cord
  • Anti-Seize Grease
  • Cloth Rags

  • Ratchets & Related

  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 17mm Wrench
  • 12mm Wrench

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Best experience and high quality at a great price!
Love 1A - only place I will shop for parts - thanks for all of the how to videos!
February 23, 2018
Purchased
9 months ago
Great
Hello Everyone, Bought brake pads and rotors not know what to expect and everything went great from service to getting shipped fast. Quality parts. Ended up not needing the rotors now but they are great quality as well. Have them to the side for next time.
November 22, 2017
Purchased
9 months ago
Very happy with my purchase. On time delivery good packaging and they work great. Definitely will be buying for my other car
November 19, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007-2013 Acura MDX Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2010-2013 Acura ZDX Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
  • 2009-2014 Honda Pilot Front & Rear Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD1378, CD1281, 42510-STX-A00, 31468
  • Reference Number CD1281
  • Reference Number CD1378
  • Hollander 533-50156, 533-50255
  • OE # 42510STXA00, 42510SZAA00
  • OE # 45251STXA00
  • Reference Number 900532
  • Reference Number 900530
Part #: 1ABFS02888


Order must be placed by 4pm ET
Nakamoto
Brand #: CD1378, CD1281, 42510-STX-A00, 31468

How-to Video:

(16:31 min)