Brake Pad Specifications:

  • 4 Piece FRONT Brake Pad Set
  • Direct replacement
  • Premium Posi CERAMIC Disc Brake Pads

Brake Rotor Specifications:

  • Fits LH (Driver Side) or RH (Passenger Side) FRONT
  • Fits 5 Lug Wheels
  • Vented
  • 11.65" (296 mm) diameter

This front brake pad & rotor kit makes a great replacement and has an excellent value over the price of dealer brake pads & rotors.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Premium Electrostatic Coated Brake Rotor Features and Benefits:

  • Electrostatically applied finish on both sides of the rotor hat and rotor edge for long lasting corrosion protection.
  • Uniform coating without any overspray.
  • Enhanced appearance.
  • Designed to withstand 400 hours of saltwater exposure without rusting.
  • Mill balanced and double-disc ground friction surface provides smooth braking and longer pad life.
  • Lifetime Warranty

    This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    Wear and Tear

    This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

    1. step : Removing the Wheel (0:24)
      • Pry off the center cap with a flat blade screwdriver
      • Loosen the 21mm lug nuts with the vehicle on the ground
      • Raise the vehicle with a floor jack
      • Secure the vehicle on jack stands
      • Remove the lug nuts
      • Pull off the wheel
    2. step : Removing the Brake Pads (1:14)
      • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
      • Remove 14mm bolts from the brake caliper
      • Pull the caliper aside and hang it by bungee cord
      • Remove the wires
      • Pry the brake pads off with a flat blade screwdriver
    3. step : Removing the Brake Rotor (2:39)
      • Remove 17mm bolts from the brake caliper bracket
      • Pull off the brake caliper bracket
      • Pull the rotor off
      • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
    4. step : Installing the New Brake Rotor (4:03)
      • Clean the hub with a wire brush
      • Clean both sides of the rotor with brake parts cleaner
      • Slide the rotor on
      • Thread on one lug nut to hold the rotor in place
    5. step : Installing the New Brake Pads (4:52)
      • Put an old pad in the caliper
      • Use a large C-clamp and the old pad to push the pistons back
      • Clean the brake pad slides with a wire brush
      • Apply grease to the caliper slides
      • Put the caliper bracket back into place
      • Start the bolts by hand
      • Apply grease to the brake pad tabs
      • Install the new brake pads into the bracket
      • Put the caliper on
      • Tighten the bolts
      • Tighten the bracket bolts to 79 foot-pounds of torque
    6. step : Reattaching the Wheel (8:01)
      • Slide the wheel into place
      • Start the lug nuts by hand
      • Tighten the lug nuts preliminarily
      • Lower the vehicle to the ground
      • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
      • Press on the hub cap
    7. step : Testing the Brakes (9:07)
      • Pump your brakes repeatedly until they feel firm
      • Test your brakes at 5 miles per hour and then 10 miles per hour
      • Road test the vehicle

    Tools needed for replacement:

      General Tools

    • Large C-Clamp
    • Jack Stands
    • Rubber Mallet
    • Wire Brush
    • Floor Jack

    • Materials, Fluids, and Supplies

    • Paper Towels
    • Bungee Cord
    • Anti-Seize Grease
    • Cloth Rags

    • Ratchets & Related

    • Torque Wrench

    • Screwdrivers & Related

    • Pry Bar

    • Sockets - Metric

    • 14mm Socket
    • 19mm Socket
    • 21mm Socket

    • Specialty Tools

    • Dead Blow Hammer

    There are no reviews for this item. Write Review
    Start typing your question and we'll check if it was already asked and answered. Learn More
    No questions have been asked about this item. Be the first!

    How-to Video:

    (09:40 min)

    Tools List:

      General Tools

    • Large C-Clamp
    • Jack Stands
    • Rubber Mallet
    • Wire Brush
    • Floor Jack

    • Materials, Fluids, and Supplies

    • Paper Towels
    • Bungee Cord
    • Anti-Seize Grease
    • Cloth Rags

    • Ratchets & Related

    • Torque Wrench

    • Screwdrivers & Related

    • Pry Bar

    • Sockets - Metric

    • 14mm Socket
    • 19mm Socket
    • 21mm Socket

    • Specialty Tools

    • Dead Blow Hammer



    This part replaces:

    • OE # 4351202250
    • OE # 43512 02250
    • OE # 4351206090
    • OE # 43512 06090
    • OE # 4351242050
    • OE # 43512 42050
    • OE # 4351242090
    • OE # 43512 42090
    • Nakamoto CD1293, 31434-E

    Vehicle Fit

    • 2013-2016 Lexus ES300h Front Premium Posi Ceramic Brake Kit Premium E-Coated Nakamoto
    • 2007-2016 Lexus ES350 Front Premium Posi Ceramic Brake Kit Premium E-Coated Nakamoto
    • 2008-2016 Toyota Avalon Front Premium Posi Ceramic Brake Kit Premium E-Coated Nakamoto
    • 2007 Toyota Camry Front Premium Posi Ceramic Brake Kit Premium E-Coated (Japan Built Models (1st VIN Digit J)) Nakamoto
    • 2008-2016 Toyota Camry Front Premium Posi Ceramic Brake Kit Premium E-Coated Nakamoto
    Part #: 1ABFS01739

    Ships Same Day for orders placed by 4 P.M. ET

    Nakamoto
    Brand #: CD1293, 31434-E

    We're here to help

    1A Auto Parts

    Customer Feedback

    "Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
    - Dwuan M.
    Read More