This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 4 Piece Front brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side FRONT
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Lug Wheels
  • Vented
  • 11.65" (296 mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Bonding Type: Premium Posi
  • Brake Pad Friction Material: Ceramic
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 5 Lug
  • Front Brake Rotor Specifications: 11.65" (296mm)
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:24)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:14)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove 14mm bolts from the brake caliper
    • Pull the caliper aside and hang it by bungee cord
    • Remove the wires
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (2:39)
    • Remove 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Installing the New Brake Rotor (4:03)
    • Clean the hub with a wire brush
    • Clean both sides of the rotor with brake parts cleaner
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
  5. step : Installing the New Brake Pads (4:52)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Put the caliper bracket back into place
    • Start the bolts by hand
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Tighten the bolts
    • Tighten the bracket bolts to 79 foot-pounds of torque
  6. step : Reattaching the Wheel (8:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Press on the hub cap
  7. step : Testing the Brakes (9:07)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Rubber Mallet
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Bungee Cord
  • Anti-Seize Grease
  • Cloth Rags

  • Ratchets & Related

  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • Dead Blow Hammer

5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Brakes are great
This is my third or fourth time using 1aauto. Always satisfied and impressed with quality and customer service.
August 8, 2018
Purchased
1 month ago
Performance and looks enhanced
Brake kit with slotted rotors really helped enhance the brakes on my 2013 Toyota Camrey. Both performance and looks were improved.
April 2, 2018
Purchased
1 year ago
Great value
This brake kit solved my problem ,which the dealer was unable to fix.
November 29, 2017
Purchased
9 months ago
Nice rotors!
My wife's Lexus ES350 was having a bad shaking when stopping, I recently intalled a full set of Nakamoto rotors and pads and they are excellent + they give a sporty look to the car!! By the way all shaking is gone!!!
March 13, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 6 answers
Can these be used on front and back?
Steve S on May 23, 2018
BEST ANSWER: These cannot be used on the rear of my 2014 Camry
Are these pads and rotors ok to use in a hybrid Camry?
Ben H on Mar 11, 2017
BEST ANSWER: This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.
Rotors made in USA or China? Are rotors dynamic balanced?
rajan on Jan 13, 2016
BEST ANSWER: Hello, We have a few different manufacturers for these items. They are generally made over seas. These are upgrade rotors, and do come with a lifetime warranty!

Vehicle Fit

Year Make Model Description
2013-2017Lexus ES300h Lexus ES300h Front Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2007-2017Lexus ES350 Lexus ES350 Front Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2008-2018Toyota Avalon Toyota Avalon Front Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2007Toyota Camry Toyota Camry (Japan Built Models (1st VIN Digit J)) Front Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto
2008-2017Toyota Camry Toyota Camry Front Premium Posi Ceramic Cross Drilled & Slotted Zinc Coated Performance Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD1293, 31434-DSZ
Part #: 1APBS00028


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD1293, 31434-DSZ

How-to Video:

(09:40 min)