Replaces
Brake Kit Nakamoto CD1264, 55148 - 1ABFS00695
1ABFS00695
Specifications:
- Premium Posi Ceramic Disc Brake Pads
- 4 Piece front brake pad set
- Includes shims
- Direct replacement
Brake Rotor Specifications:
- Comes as a Pair
- Fits LH (Driver Side) & RH (Passenger Side) Front
- Replaces dealer part numbers: 15837488, 25804049, 5521178J00, 55211 78J00, 5521178J01, 55211 78J01
- Fits 5 Stud Wheels
- Vented
- 11.65" (296mm) diameter
Premium Positive Molded Brake Pads Features and Benefits:
- The very same manufacturing process the original equipment manufacturers use
- High density friction material for long pad life
- Less resin content virtually eliminates brake fade and glazing
- Reduced dusting for both Ceramic and Semi-metallic materials
- Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.
OE Grade Multi-Layer ShimReduces noise and vibration
Environmentally CompliantMeets the Better Brake Law standards
Thermal ScorchedAccelerates the break-in process and enhances stopping performance from the first stop.
100% CNC-Machined to Exact OE SpecsBalanced to reduce vibration.
Cast from OE Grade AlloyManufactured from OE Grade G3000 Casting Alloy.
Non-Directional Surface FinishHelps ensure smoother, quieter, and more effective braking.
Part Details
- Brake Pad Friction Material: Ceramic
- Brake Pad Bonding Type: Premium Posi
- Kit Includes: (1) Front Ceramic Brake Pad Set
- Kit Includes: (2) Front Replacement Brake Rotors
- Front Brake Rotor Specifications: Vented
- Front Brake Rotor Specifications: 5 Lug
- Front Brake Rotor Specifications: 11.65" (296mm)
Lifetime Warranty
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.
Wear and Tear
This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.
-
step : Removing the Wheel (0:58)
- Loosen the 19mm lug nuts with the vehicle on the ground
- Raise the vehicle with a floor jack
- Secure the vehicle on jack stands
- Remove the lug nuts
- Pull off the wheel
-
step : Removing the Brake Pads (1:57)
- Remove the T30 Torx bit from the rotor
- Remove 14mm bolts from the brake caliper
- Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
- Pull the caliper aside
- Pry the brake pads off with a flat blade screwdriver
-
step : Removing the Brake Rotor (3:04)
- Remove 18mm bolts from the brake caliper bracket
- Pull off the brake caliper bracket
- Pull the rotor off
- If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
-
step : Cleaning the Brake Parts (5:34)
- Clean off any rust on the hub/centerbore with a wire brush
- Coat the hub with brake grease
- Install the rotor backwards and clean it with brake parts cleaner
- Install the rotor and spray the front with brake parts cleaner
- Reinstall the T30 Torx screw to the rotor
- Remove the brake shims
- Clean the shims with a wire brush
- Remove the brake pad slides
- Apply anti-seize fluid or white grease to the slides
- Push the slides on with a flat blade screwdriver
-
step : Installing the Caliper Bracket (8:30)
- Put the bracket back into place
- Start the 18mm bolts by hand
- Tighten the bolts to 137 foot-pounds of torque
-
step : Installing the New Brake Pads (8:57)
- Put an old pad in the caliper
- Use a large C-clamp and the old pad to push the pistons back
- Install the new brake pads into the bracket
- Apply brake grease to the pads
- Put the caliper on
- Thread bolts by hand
- Tighten 14mm bolts to 20 foot-pounds
- Clean the rotor with brake parts cleaner or mineral spirits
-
step : Reattaching the Wheel (10:41)
- Slide the wheel into place
- Start the lug nuts by hand
- Tighten the lug nuts preliminarily
- Lower the vehicle to the ground
- Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
Tools needed for replacement:
- Large C-Clamp
- Jack Stands
- Hammer
- Wire Brush
- Floor Jack
- Anti-Seize Grease
- Bungee Cord
- Channel-Lock Pliers
- Ratchet
- Torque Wrench
- Socket Extensions
- 1/2 Inch Breaker Bar
- Flat Blade Screwdriver
- 18mm Socket
- 19mm Socket
- 14mm Socket
- T30 Torx Bit
General Tools
Materials, Fluids, and Supplies
Pliers, Cutters & misc Wrenches
Ratchets & Related
Screwdrivers & Related
Sockets - Metric
Torx Drivers & Sockets
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Vehicle Fit
- 2007-2009 Chevy Equinox Front Premium Posi Ceramic Brake Kit Nakamoto
- 2007-2009 Pontiac Torrent Front Premium Posi Ceramic Brake Kit Nakamoto
- 2008-2010 Saturn Vue Front Premium Posi Ceramic Brake Kit Nakamoto
- 2007-2009 Suzuki XL-7 Front Premium Posi Ceramic Brake Kit Nakamoto
This part replaces:
- Nakamoto CD1264, 55148
- Reference Number CD1264
- Reference Number 900320
- Hollander 530-00123, 530-50211
