These brake rotors & pads are just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Ceramic Disc Brake Pads
  • 4 Piece FRONT Brake Pad Set
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 1771063, 10390111, 25853001
  • Fit 6 Lug Wheels
  • Direct replacements

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:08)
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (1:40)
    • Hold the wheel studs with a pry bar
    • Remove the T30 screw in the rotor
    • Loosen the 13mm bolts from the brake caliper
    • Remove the 13mm bolts from the brake caliper
    • Pull the caliper aside and hang it out of the way with a bungee cord
    • Pry the brake pads off with a flat blade screwdriver
    • Loosen the 21mm caliper bracket bolts
    • Remove the 21mm caliper bracket bolts
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  3. step : Preparing the New Brake Pads and Rotors (6:15)
    • Clean the hub with a steel wire brush
    • Apply grease to the hub
    • Apply anti-seize fluid or white grease to the slides
    • Push the slides on
    • Clean the brake pad shims with a wire brush
    • Clean the caliper bracket with a wire brush
    • Apply grease to the shins
    • Put the rotor on backwards
    • Clean the rotor with brake parts cleaner
  4. step : Installing the New Brake Rotor (10:30)
    • Clean the front of the rotor with brake parts cleaner
    • Slide the rotor on
    • Tighten the T30 Torx screw to the rotor
  5. step : Installing the New Brake Pads (11:20)
    • Put the caliper bracket back into place
    • Start the 21mm bolts by hand
    • Tighten the bolts to 129 foot-pounds of torque
    • Install the new brake pads into the bracket
    • Apply grease to the brake pads
    • Compress the caliper piston with a C-clamp
    • Put the caliper on
    • Thread the 13mm bolts by hand
    • Tighten the bolts to 47 foot-pounds
  6. step : Reattaching the Wheel (13:57)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a triangle pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Dust Mask
  • Safety Glasses
  • Brake Parts Cleaner
  • Gloves
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket
  • 13mm Socket
  • 22mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

5.0 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Quality parts
I was pleased with the fast shipping. The packaging was adequate to protect the parts. I was extremely pleased with the high quality of the parts. The online videos are invaluable for helping with the installation process. I had the repair job done in no time. I will not hesitate to order parts from 1A auto in the future.
November 11, 2017
6 months ago
Great Product, Great Price
Fantastic value! Everything delivered exactly as expected.
April 2, 2018
2 months ago
Great service
Great product! Your do it yourself videos are always very helpful.
November 21, 2017
6 months ago
Great fit. Great shipping
I came to this site after watching their YouTube videos about replacing the brakes on my SUV. These are great pads and rotors. And the shipping was very fast.
February 28, 2017
1 year ago
First Brake Job Ever and it was easy
Thanks 1AAuto for making my first brake job a breeze. I don't think I'll pay for a brake job in the future. Your youtube videos made the process very easy. I had every tool laid out before I started the job. Super easy, I'll definately recommend you guys to my friends.
September 8, 2017
9 months ago
Why pay someone to do it?
At first I was a little hesitant to do the front brake job myself. You never know what you will encounter and once you have it apart there's no turning back. I never heard of Nakamoto but after reviewing their website I decided this would be a go. The parts came 2 days after I ordered them which was a surprise. I watched the video a couple times to make sure I had it all right and then I went to work. The hardest part of this job was breaking loose the big slide bolts and then getting the old router off. Just be patient, they will break free and come off. Once I had those off it was a matter of cleaning the existing surfaces and greasing contacts and then putting it all back together again. It took me just over an 90 minutes to do both front brakes with 30 of those minutes breaking bolts loose and getting the old routers off. Had the car been on a lift it would have been easier but who has a lift at their house? The quality of the router and brake pads appeared to be very good but only time will tell on how well they hold up. I took the car for a spin afterwards and the brakes stopped me on a dime so I feel good about the job. One thing I would recommend is either 1a Auto should include the brake pads kit in with this or you should add it to your order. When taking the old pads out, 2 of my clips broke so a quick trip to the auto store was needed to get four new clips.
November 10, 2017
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2008-2015 Buick Enclave Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2009-2016 Chevy Traverse Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2007-2016 GMC Acadia Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2007-2010 Saturn Outlook Front Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD1169A, 25853001
Part #: 1ABFS01878

Brand #: CD1169A, 25853001

How-to Video:

(14:39 min)