Replaces

Brake Kit Nakamoto CD1108, CD1107, 34294-DSZ, 34303-DSZ - 1APBS00854

Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a set of 4
    • Includes both LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 5 Lug Wheel
  • 11.30" (288mm) diameter vented front
  • 10.07" (256mm) diameter solid rear

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Brake Rotor Coating: Zinc Coated
  • Brake Pad Bonding Type: Premium Posi
  • Brake Rotor Type: Cross Drilled & Slotted
  • Kit Includes: (1) Front Ceramic Brake Pad Set
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Front Performance Brake Rotors
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Front Brake Rotor Specifications: Vented
  • Rear Brake Rotor Specifications: Solid
  • Front Brake Rotor Specifications: 11.34" (288mm)
  • Front Brake Rotor Specifications: 5 Lug
  • Rear Brake Rotor Specifications: 10.08" (256mm)
  • Rear Brake Rotor Specifications: 5 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:48)
    • Loosen the lug nut covers with a pick
    • Loosen one of the lug bolts with a key found by the spare tire
    • Loosen the 17mm lug bolts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:23)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:53)
    • Pry off the caps on the brake caliper
    • Remove the T47 bolts from the brake caliper
    • Pry off the wire clip with a flat blade screwdriver
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (2:47)
    • Remove the 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 screw from the rotor
    • Spray rust penetrant around the edge of the hub
    • Strike the hub area of the rotor with the ball end of a ball peen hammer
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (3:48)
    • Slide the rotor on
    • Tighten the T30 screw to the rotor
    • Clean the brake caliper bracket with a wire brush
    • Put the bracket back into place
    • Start the 21mm bolts by hand
    • Tighten the bolts to 90 foot-pounds of torque
  6. step : Installing the New Brake Pads (4:51)
    • Use a large C-clamp and the old pad to push the piston back
    • Apply brake grease to the back of the pad and their contact points in the bracket
    • Install the new brake pads into the caliper
    • Put the caliper on
    • Thread the T47 bolts by hand
    • Tighten bolts to 30 foot-pounds
    • Push the wire clip onto the brake caliper
    • Replace the brake caliper caps
  7. step : Reattaching the Wheel (6:42)
    • Slide the wheel into place
    • Start the lug bolts by hand
    • Tighten the lug bolts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Tighten the lug nut covers
  8. step : Testing the Brakes (7:34)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Pick
  • Jack Stands
  • Floor Jack
  • Large C-Clamp
  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Bit
  • T47 Torx Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Brake pads and rotors.. rotors drilled and slotted
I purchased a very awesome brake kit that included some very professional ceramic brake pads with all the hardware.The set also included some really nice drilled and slotted front and rear rotors.The vehicle I'm working on is a 2007 Volkswagen Jetta 2.5 , I paid $165.00. for the set, I've been in the automotive business for @ 25 years,these nokamato parts ARE REALLY A GREAT DEAL.Thanks 1A Auto.
March 27, 2018
Purchased
5 months ago
Exactly what I wanted, quality
Strong packaging, Excellent quality and now I get no after it rains noise from my brakes
December 6, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2009-2013Audi A3 Audi A3 Front & Rear Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit for Models with 11.30" (287mm) Diameter Front Rotors 10.07" (256mm) Diameter Rear Rotors Performance Nakamoto
2009-2013Audi A3 Quattro Audi A3 Quattro Front & Rear Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit for Models with 11.30" (287mm) Diameter Front Rotors 10.07" (256mm) Diameter Rear Rotors Performance Nakamoto
2010Volkswagen Golf VW Golf Front & Rear Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit for Models with 11.30" (287mm) Diameter Front Rotors 10.07" (256mm) Diameter Rear Rotors Performance Nakamoto
2005Volkswagen Jetta VW Jetta Front & Rear Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit L5 2.5L for Models with 11.30" (287mm) Diameter Front Rotors 10.07" (256mm) Diameter Rear Rotors Performance Nakamoto
2006-2010Volkswagen Jetta VW Jetta Front & Rear Cross Drilled & Slotted Zinc Coated Brake Kit for Models with Premium Posi Ceramic 10.07" (256mm) Diameter Rear Rotors 11.30" (287mm) Diameter Front Rotors Performance Nakamoto
2006-2009Volkswagen Rabbit VW Rabbit Front & Rear Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit for Models with 10.07" (256mm) Diameter Rear Rotors Performance Nakamoto

This part replaces:

  • Nakamoto CD1108, CD1107, 34294-DSZ, 34303-DSZ
  • Reference Number CD1108
  • Reference Number 1108
  • Reference Number 1107
  • Reference Number CD1107
Part #: 1APBS00854

Out of Stock

Nakamoto
Brand #: CD1108, CD1107, 34294-DSZ, 34303-DSZ

How-to Video:

(08:02 min)