This FRONT brake rotor & Ceramic Pad SET is just what you need to get your vehicle stopping in good order again!

You will receive (2) front rotors and (1) Front Disc Brake Pad Set!

Rotor Specifications:

  • Fits both the LH (Driver) & RH (Passenger Side) FRONT
  • Direct replacements
  • 6 wheel stud holes

Brake Pad Specifications:

  • Premium Posi Ceramic Brake Pads
    • Standard equipment came with ceramic pads
  • 4 Piece Front brake pad set
  • Direct replacements

This front brake rotor & pad KIT makes great replacements and have excellent value over the price of a dealer brake rotor and pad set.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Step 1: Remove the Wheel (1:56)
    • Remove the lug nut caps and center cap.
    • Loosen the lug nuts on the wheel.
    • Lift the vehicle using jack stands.
    • Remove the lug nuts and pull the wheel off.
    • Turn the wheel so you can access the brakes easily.
  2. step : Step 2: Removing the Brakes (2:16)
    • Remove the two 19mm bolts on the back of the caliper.
    • Lift the caliper up and set it aside.
    • Remove the brake pads.
    • Make sure the slide pins on the back of the bracket slide in and out easily. If not remove them and grease them.
    • Remove the two 18mm bolts on the back of the bracket. Use the breaker bar for extra leverage.
    • Thread the lug nuts on by a few threads.
    • Hit the disk to loosen it. Hit from the front then on the back, turning the rotor and hitting it again.
    • Remove the lug nuts and rotor.
  3. step : Step 3: Installing New Brakes (6:32)
    • Slide the rotor into place.
    • Clean the bracket with a wire brush.
    • Put the bracket back into place and start the bolts.
    • Replace the nuts on the rotor.
    • Tighten the bracket bolts to 90-95ft/lbs.
    • Clean the old slides (if the pads did not come with new slides) with a wire brush then put them back into place.
    • Replace the brake pads. The larger one goes on the back.
    • Put the old inner pad into the caliper and use a C-Clamp to reset the caliper. Tighten the C-clamp to push the pistons back into the caliper.
    • Put the caliper down over the brake pads.
    • Replace the 19mm bolts that hold the caliper to the slides. Tighten to 55-60ft/lbs.
  4. step : Step 4: Replacing the Wheel (9:53)
    • Straighten the wheel.
    • Replace the wheel and tire.
    • Thread the lug nuts.
    • Lower the vehicle.
    • Tighten the lug nuts in a crossing pattern.
    • Replace the caps and trim.
  5. step : Step 5: Prep the Brakes (10:39)
    • Pump the brakes a few times until the pedal is firm.

Tools needed for replacement:

    General Tools

  • Chisel
  • Jack Stands
  • Large C-Clamp
  • Sledge Hammer
  • Wire Brush

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket
  • 22mm Socket

4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
1
0
0
0
Awesome product, truck brakes nice and smooth and not a ton of brake dust. Time will tell how they wear.
April 21, 2018
Purchased
1 month ago
Quality parts UNBELIEVABLY fast
I've bought many products through 1A. I have always been satisfied with the quality of the products they offer. This is the first time I've used this particular kit. I will update with info on how they wear. As usual, 1A shipped immediately. I am always astonished at how fast the items get here. This time it was the next day!!!!!
February 16, 2017
Purchased
1 year ago
Great service
Ordering is real easy, shipping was great. Will be using them again.
January 25, 2018
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007 Cadillac Escalade Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2007 Cadillac Escalade ESV Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2007 Cadillac Escalade EXT Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2007 Chevy Avalanche 1500 Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2005-2006 Chevy Silverado 1500 Front Premium Posi Ceramic Brake Kit for Models with Rear Drum Brakes Nakamoto
  • 2007 Chevy Silverado 1500 Classic Front Premium Posi Ceramic Brake Kit with Rear Drum Brakes Nakamoto
  • 2007 Chevy Suburban 1500 Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2007 Chevy Tahoe Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2005-2006 GMC Sierra 1500 Front Premium Posi Ceramic Brake Kit for Models with Rear Drum Brakes Nakamoto
  • 2007 GMC Sierra 1500 Classic Front Premium Posi Ceramic Brake Kit with Rear Drum Brakes Nakamoto
  • 2007 GMC Yukon Front Premium Posi Ceramic Brake Kit Nakamoto
  • 2007 GMC Yukon XL 1500 Front Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Hollander 530-02186
  • Nakamoto CD1092, 55097
Part #: 1ABFS00101


Nakamoto
Brand #: CD1092, 55097

How-to Video:

(11:06 min)