Brake Pad Specifications:

  • Premium Posi Ceramic Brake Pad
  • 4 Piece front brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a match pair
    • Includes both LH (Driver Side) & RH (Passenger Side) Front
  • Cross drilled, Slotted, And Zinc Coated
  • Fits 6 Stud Wheels
  • Vented
  • 12.99" (330mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:21)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brake Pads (2:09)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the two 13mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (3:02)
    • Remove two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread one lug nut and tap the rotor loose with a hammer
  5. step : Installing the Brake Rotor (3:31)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply grease to the caliper slides
    • Remove the brake pad slides
    • Clean the slide mounting area with a wire brush
    • Put the bracket back into place
    • Start the two 18mm bolts by hand
    • Tighten the 18mm bolts to 95 foot-pounds of torque
  6. step : Installing the Brake Pads (5:39)
    • Put the brake pad slides into place
    • Push the brake pad slide tabs into place with a hammer and flat blade screwdriver
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Push in the brake pad clips
    • Put the caliper on
    • Thread the two 13mm bolts by hand
    • Tighten bolts to 25 foot-pounds
  7. step : Reattaching the Wheel (8:42)
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut to X foot-pounds
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (9:31)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Large C-Clamp
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • White Grease

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 21mm Socket
  • 13mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 3 answers
Do these rotors have studs in them?
Joecoolbro on Aug 10, 2017
BEST ANSWER: Yes, these will have the studs and come in a pair to replace the passenger side and driver side.
Do these rotors come with wheel bearings In them?
David on Jan 30, 2018
BEST ANSWER: Yes.
Does this come with the spindle nut?
David K on Feb 20, 2018

How-to Video:

(10:02 min)

Tools List:

    General Tools

  • Wire Brush
  • Jack Stands
  • Large C-Clamp
  • Floor Jack
  • Hammer

  • Materials, Fluids, and Supplies

  • White Grease

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 21mm Socket
  • 13mm Socket



This part replaces:

  • Nakamoto CD1083, 54107-DSZ
  • Reference Number CD1083

Vehicle Fit

  • 2004 Ford F150 Truck New Body Style 2 Wheel Drive 6 Lug Wheels Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 2005-2008 Ford F150 Truck 2 Wheel Drive 6 Lug Wheels Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
  • 2006-2008 Lincoln Mark LT 2 Wheel Drive 6 Lug Wheels Front Cross Drilled & Slotted Zinc Coated Premium Posi Ceramic Brake Kit Performance Nakamoto
Part #: 1APBS00857

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD1083, 54107-DSZ

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More